Beko WM85135LW User Manual Download

Page: 33 / 40

Washing Machine /User’s Manual

33 / 40 EN

Troubleshooting

Programme cannot be started or selected.

• Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure,

etc.). >>>

Press and hold Start / Pause / Cancel button for 3 seconds to reset the machine to factory settings.

Water in the machine.

• Some water might have remained in the product due to the quality control processes in the production. >>>

This

is not a failure; water is not harmful to the machine.

There is water leaking from the bottom of the washing machine.

• Likely problems with hoses or the pump filter. >>>

Be sure the seals of the water inlet hoses are securely fitted.

Attach the hose to the tap tightly.

• Pump filter might not be closed fully. >>>

Make sure that the pump filter is completely closed.

Machine does not fill with water.

• Tap is turned off. >>>

Open the inlet water taps fully.

• Water inlet hose is bent. >>>

Flatten the water inlet hose.

• Water inlet filter is clogged. >>>

Clean the water inlet filter.

• The loading door is ajar. >>>

Close the Loading Door.

Machine does not drain water.

• Water drain hose might be clogged or twisted. >>>

Clean or flatten the hose.

• Pump filter is clogged. >>>

Clean the pump filter.

Machine vibrates or makes noise.

• Machine might be standing unbalanced. >>>

Adjust the feet to level the machine.

• A hard substance might have entered into the pump filter. >>>

Clean the pump filter.

• Transportation safety bolts are not removed. >>>

Remove the transportation safety bolts.

• Laundry quantity in the machine might be too little. >>>

Add more laundry to the machine.

• Machine might be overloaded with laundry. >>>

Take out some of the laundry from the machine or distribute the

load by hand to balance it homogenously in the machine.

• Machine might be leaning on a rigid item. >>>

Make sure that the machine is not leaning on anything.

Machine stopped shortly after the programme started.

• Machine might have stopped temporarily due to low voltage. >>>

It will resume running when the voltage

restores to the normal level.

Machine directly discharges the water it takes in.

• Draining hose might not be at adequate height. >>>

Connect the water draining hose as described in the

operation manual.

No water can be seen in the machine during washing.

• The water level is not visible from outside of the washing machine. This is not a failure.

Loading door cannot be opened.

• Door lock is activated because of the water level in the machine. >>>

Drain the water by running the Pump or

Spin programme.

• Machine is heating up the water or it is at the spinning cycle. >>>

Wait until the programme completes.

• Child lock is engaged. Door lock will be deactivated a couple of minutes after the programme has come to an

end. >>>

Wait for a couple of minutes for deactivation of the door lock.

Summary of Contents for WM85135LW









































Search results

Summary of Contents for WM85135LW

Reviews:

Related manuals for WM85135LW

Brands by name

Popular brands

Beko WM85135LW, User Manual

Search results

Summary of Contents for WM85135LW

Reviews:

Related manuals for WM85135LW

Brands by name

Popular brands