Beko WMA 727 S, Installation & Operating Instructions Manual

EN

20

Auxiliary functions

Auxiliary function selection keys

•  Depending on the program, you can 

select the desired auxiliary function 

by pressing the keys 11a, 11b, 11c, 

11d.

•  Select the required auxiliary 

functions before starting the 

program.

•  Some combinations cannot be 

selected together. (Ex.: Prewash 

(Figure 2-11a) and Quick Wash 

(Figure 2-11b).

•  Symbol of the selected auxiliary 

function (Figure 3-13l) will light up.

Auxiliary function selection

If an auxiliary function that should not 

be selected together with a previously 

selected function is chosen, the first 

selected function will be cancelled and 

the last auxiliary function selection will 

remain active.

(Ex.: If you want to select prewash first 

and then quick wash, prewash will be 

cancelled and quick wash will remain 

active.

Auxiliary function that is not compatible 

with the program cannot be selected. 

(see, “Program Selection Table”)

Prewash

When you select this function (11a), the 

display will indicate “F1” symbol.

•  A prewash is only required with 

heavily soiled laundry. Without 

prewash you save energy, water, 

detergent and time.

•  Prewash without detergent is 

recommended for veils and curtains.

Quick wash

With this program (11b), the wash time 

is shortened. “F2” symbol will light up on 

the display.

•  Use this function for smaller 

amounts or slightly soiled laundries.

Extra rinse

This function (11c) allows your machine 

to perform an extra rinsing in addition 

to the rinsing cycles performed by your 

machine after main washing cycle. 

Thus, the risk for sensitive skins (babies, 

allergic skins and etc.) to be effected by 

the minimal detergent remnants on the 

laundry is reduced. “F3” symbol will light 

up on the display.

Anti-creasing

With this function (11d), drum rotation 

will be lessened to prevent creasing and 

spinning speed is limited. In addition, 

washing is carried out at a higher water 

level. “F4” symbol will light up on the 

display.

•  Use this function for delicate 

laundries that crease easily.

C

  Whenever you select this auxiliary 

function, load your machine with 

half of the maximum laundry amount 

specified in the program table.

Time screen

The display shows the time remaining 

for the program to complete while a 

program is running. Time is displayed in 

hours and minutes as “01:30”.

•  Program duration may differ from 

the values in the consumption table 

subject to the changes in the water 

pressure, water hardness and 

temperature, ambient temperature, 

type and amount of laundry, 

auxiliary functions selected, and 

changes in the supply voltage.

11a

11b

11c

11d