Beko WMA 727 S, Installation & Operating Instructions Manual

EN

21

Time delay

With the “Time delay” function you can 

delay the program start up to 24 hours. 

Setting can be made in intervals of 30 

minutes.

1.  Open the loading door, place the 

laundry inside and fill with detergent.

2.  Set the washing program, 

temperature, spin speed and, 

if required, select the auxiliary 

functions.

3.  Press “Time delaying” buttons “+” 

and “-” (Figure 2-8) to set your 

desired time delay.  Time delaying 

symbol (Figure 3-13h) will flash.

4.  Press “Start/Pause/Cancel” button 

(Figure 2-10). Then the time delay 

starts to count down. Time delaying 

symbol (Figure 3-13h) will light up. 

Start symbol (Figure 3-13j) will light 

up.

The “:” in the middle of the displayed 

time delay will start flashing.

•

  More laundry may be loaded or 

taken out during the time delay 

period. At the end of the time delay 

countdown process, time delaying 

symbol (Figure 3-13h) fades and 

the washing starts as the program 

duration is displayed.

Changing the delay time

If you want to change the time during 

the countdown:

1.  Press “Start/Pause/Cancel” button 

(Figure 2-10). “:” in the middle of the 

screen will stop flashing. Standby 

symbol (Figure 3-13k) will light up. 

Time delaying symbol (Figure 3-13h) 

will flash. Start Symbol (Figure 3-13j) 

will fade.

2.  Press “Time delaying” buttons “+” 

and “-” (Figure 2-8) to set your 

desired time delay. 

3.  Press “Start/Pause/Cancel” button 

(Figure 2-10). Time delaying symbol 

(Figure 3-13h) will light up. Standby 

symbol (Figure 3-13k) will fade. Start 

symbol (Figure 3-13j) will light up.

4.  The “:” in the middle of the displayed 

time delay will start flashing.

Cancelling the time delay

If you want to cancel the time delay 

countdown and start the program 

immediately:

1.  Press “Start/Pause/Cancel” button 

(Figure 2-10). The “:” in the middle 

of the displayed time delay will stop 

flashing.

2.  Start symbol (Figure 3-13j) will fade. 

The standby symbol (Figure 3-13k) 

and the time delaying symbol (Figure 

3-13h) will flash.

3.  Press time delaying button “-” 

(Figure 2-8) to decrease the desired 

time delay. Program duration after 

30 minutes shall be displayed.

4.  Press “Start/Pause/Cancel Button” 

(Figure 2-10) to start the program.

Starting the program

1.  Press “Start/Pause/Cancel” button 

(Figure 2-10) to start the program.

2.  The start symbol (Figure 3-13j) 

which indicates that the program 

has started will light up.

3.  The door locks and the door locked 

symbol (Figure 3-13i) will light up.

4.  Symbol of the relevant step 

(prewash, main wash, rinse, softener 

and spin) that the program has 

started from will light up (Figure 

3-13f).

Progress of program.

The progress of a running program is 

shown through a number of symbols on 

the screen.

•

At the beginning of each program 

step, the relevant symbol in the 

series of symbols will light up and 

thus, at the end of the program, 

all symbols will remain lit up. The 

symbol that is lit up at the far right of 

the series of symbols indicates the 

step that is being carried out.

Prewash

When “Prewash” auxiliary function is