Beko WMA 727 S, Installation & Operating Instructions Manual

EN

22

selected, prewash symbol will light up to 

indicate the beginning of prewash step.

Main wash

Main wash symbol will light up to 

indicate that the main wash cycle has 

started.

Rinse

Rinse symbol lights up at the beginning 

of the rinse step.

Softener  

Softener symbol lights up at the 

beginning of softener step. 

Spin

Spin symbol will light up at the beginning 

of the final spin, during “Spin” and 

“Pump” special programs.

•

  If the machine is not spinning, the 

program may be in rinse hold mode 

or the automatic spin correction 

system has been activated because 

of the excessive unbalanced 

distribution of the laundry in the 

machine.

Changing the selections after 

the program has started

The selected spin speed and program 

temperature fade out. An empty frame 

appears.

When the “Program selection” button is 

brought to the appropriate position, rpm 

and temperature data reappear.

Switching the machine to standby 

mode

Machine is switched to standby mode 

by pressing “Start/Pause/Cancel” button 

(Figure 2-10) for a short time. Standby 

symbol (Figure 3-13k) which indicates 

that the machine is in standby mode 

lights up and the start symbol (Figure 

3-13j) that shows the program has 

started and is still continuing fades out.

Selecting or cancelling an auxiliary 

function in standby mode

Auxiliary functions can be cancelled or 

selected in accordance with the step the 

program is at.

Adding/taking out laundry in standby 

mode

The door can be opened if the water 

level is suitable. The door locked symbol 

(Figure 3-13i) will light up until the door 

is suitable for opening. This symbol will 

fade out as soon as the door is allowed 

to open. Laundry may be added / taken 

out by opening the door.

Door lock

Door Locked Symbol (Figure 3-13i) lights 

up when the loading door is locked. This 

symbol will flash until the door is allowed 

to open. Do not force the door at this 

stage. This symbol will fade out as soon 

as the door is allowed to open. You may 

open the door after the symbol fades 

out.

Child-proof lock

You can protect the appliance from 

being tampered by children by means 

of the child-proof lock. In this case, no 

change can be made in the running 

program.

2. The machine is switched to child-lock 

by pressing the 2nd and 4th auxiliary 

functions for 3 sec. “C:on” (Child lock is 

activated) label appears on the screen. 

The same symbol will also be displayed 

on the screen whenever any button 

is pressed while the machine is child-

locked.

To deactivate the child-proof lock, 

press the 2nd and 4th auxiliary function 

buttons for 3 sec.

“C:OFF” (Child lock is deactivated) label 

appears on the screen.

Cancelling the program

“Start/Pause/Cancel” button (Figure 

2-10) is pressed for 3 seconds to cancel 

the program. Start symbol (Figure 

3-13j) will flash during cancellation. 

After cancellation, the symbol of the 

corresponding step at which the 

cancellation was made will remain lit and 

“End” label will appear on the screen.