27
RO
7
Depanare
Programul nu poate fi pornit sau selectat.
• A fost activat automat modul de protecţie a maşinii de spălat din cauza unei
probleme de alimentare (tensiune, presiunea apei etc.). >>>
Apăsaţi timp de 3
secunde butonul Pornire / Pauză / Anulare pentru a reveni la setările din fabrică.
(Vezi "Anularea programului")
Rămâne apă în maşină.
• Este posibil ca în maşină să existe apă rămasă din timpul proceselor de control al
calităţii. >>>
Aceasta nu este o defecţiune; apa nu deteriorează maşina.
Curge apă de sub maşina de spălat.
• Posibilă problemă la furtunuri sau la filtrul pompei. >>>
Verificaţi dacă garniturile
furtunurilor de alimentare cu apă sunt montate corect. Fixaţi strâns furtunul pe
robinet.
• Filtrul pompei nu este închis complet. >>>
Asiguraţi-vă că filtrul pompei este închis
complet.
Maşina nu se alimentează cu apă.
• Robinetul este închis. >>>
Deschideţi complet robinetele de apă.
• Furtunul de alimentare cu apă este îndoit. >>>
Întindeţi furtunul de alimentare cu
apă.
• Filtrul de alimentare cu apă este înfundat. >>>
Curăţaţi filtrul de alimentare cu apă.
• Uşa de serviciu este întredeschisă. >>>
Închideţi uşa de serviciu.
Maşina nu evacuează apa.
• Furtunul de evacuare a apei este înfundat sau răsucit. >>>
Curăţaţi sau întindeţi
furtunul.
• Filtrul pompei este înfundat. >>>
Curăţaţi filtrul pompei.
Maşina vibrează sau face zgomot.
• Maşina nu este echilibrată. >>>
Reglaţi picioarele pentru a echilibra maşina.
• Filtrul pompei este obturat. >>>
Curăţaţi filtrul pompei.
• Şuruburile de fixare pentru transport nu sunt demontate. >>>
Demontaţi şuruburile
de fixare pentru transport.
• Sunt prea puţine rufe în maşină. >>>
Adăugaţi mai multe rufe în maşină.
• Maşina este supra-încărcată cu rufe. >>>
Scoateţi o parte din rufe din maşină sau
distribuiţi-le manual omogen în maşină pentru a o echilibra.
• Maşina atinge un obiect rigid. >>>
Asiguraţi-vă că maşina nu atinge alte obiecte.
Maşina s-a oprit imediat după începerea programului.
• Maşina de spălat se poate opri temporar din cauza tensiunii joase. >>>
Îşi va relua
programul când tensiunea va ajunge la un nivel normal.
Maşina evacuează apa imediat după alimentare.
• Furtunul de evacuare este la înălţime incorectă. >>>
Conectaţi furtunul de evacuare
conform instrucţiunilor din manualul de utilizare.
În timpul spălării nu se vede apa din maşină.
C
Nivelul apei nu este vizibil din exteriorul maşinii de spălat. Aceasta nu reprezintă o
defecţiune.
Uşa de serviciu nu poate fi deschisă.
• Uşa este blocată din cauza nivelului apei din maşină. >>>
Evacuaţi apa folosind
programul Evacuare sau Centrifugare.
• Maşina încălzeşte apa sau este la etapa de centrifugare. >>>
Aşteptaţi terminarea
programului.
• Este activată blocarea pentru copii. Blocajul uşii va fi dezactivat la câteva minute
după terminarea programului. >>>
Aşteptaţi câteva minute ca uşa să fie deblocată.
Summary of Contents for WMB 51232 PT
Page 1: ...Masina de spalat automata Washing Machine WMB 51232 PT ...
Page 32: ......