background image

11 / EN

Washing Machine / User’s Manual 

• mini

Use this programme to wash your lightly soiled cotton clothes 

in a short time.

• Cottons with Prewash 

Prefer this programme only for heavily soiled cotton clothes.

C

InformatIons

Not using this programme with prewash will save energy, water, 

detergent and time.

4.5 special programmes

For specific applications, select any of the following 

programmes.

• rinse

Use this programme when you want to rinse or starch 

separately.

• spin + Drain

Use this programme to apply an additional spin cycle for your 

laundry or to drain the water in the machine.

C

InformatIons

If you wish to drain the water only without spinning your laundry, 

select the Spin+Pump programme and press “Start / Pause” 

button. Machine will switch to spin step once it completes the 

program step. Press “Start / Pause” button to stop the machine as 

soon as you see the drum rotating. And cancel this programme by 

turning Programme Selection knob to any other position.

4.6 spin speed selection

Whenever a new programme is selected, the recommended 

spin speed of the selected program is displayed on the spin 

speed indicator.

To decrease the spin speed, press the spin speed adjustment 

button. Spin speed decreases gradually.

Then, depending on the model of the product, “Rinse Hold” 

and “No Spin” options appear on the spin speed led indicator.

 

4.7 rinse Hold

If you are not going to unload your clothes immediately after 

the programme completes, you may use rinse hold function to 

keep your laundry in the final rinsing water in order to prevent 

them from getting wrinkled when there is no water in the 

machine.

In rinse hold step, the machine will be in pause mode and 

“start/pause” led will be blinking. In rinse hold step, if you 

want to drain the water without spinning your laundry, 

press the “start/pause” button. Programme will resume and 

complete after draining the water.

If you want to spin the laundry held in water, select the 

spin speed and press “start/pause button. The programme 

resumes, water is drained, laundry is spun and the 

programme is completed.

Summary of Contents for WMB 71001 M+


















Reviews: