13 / EN
Washing Machine / User’s Manual
4.9 starting the programme
Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of the
programme will turn on.
Progress of programme
Progress of a running programme can be followed from the
Programme Follow-up indicator with the lights "Running" and
"End/Cancel".
C
InformatIons
If the machine does not pass to the spinning step, automatic
unbalanced load detection system might have been activated due to
the unbalanced distribution of the laundry in the machine.
4.10 Loading door lock
There is a locking system on the loading door of the machine
that prevents opening of the door in cases when the water
level is unsuitable.
If you want to open loading door when the machine is in use,
press "Start / Pause" button to pause the machine. "Door
Open" light will start flashing when the machine is switched
to Pause mode. Machine checks the level of the water inside.
If the level is suitable, "Door Open" light illuminates steadily
within 1-2 minutes and the loading door can be opened.
If the level is unsuitable, "Door Open" light turns off and the
loading door cannot be opened. If you are obliged to open
the loading door when the "Door Open" light is off, you
have to cancel the current programme; see "Cancelling the
programme".
Switching the machine to pause mode
Press the "Start / Pause" button to switch the machine to
pause mode while a programme is running. "Running" light
starts flashing on the Programme Follow-up indicator to show
that the machine has been switched to the pause mode.
When the loading door is ready to be opened, "Door Open"
light will illuminate continuously.
Adding or taking out laundry
Press "Start / Pause" button to switch the machine to pause
mode. When the machine is switched to pause mode,
"Running" light flashes. Wait until the Loading Door can be
opened. Open the Loading Door and add or take out the
laundry.
Close the Loading Door. Press "Start / Pause" button to start
the machine.
C
InformatIons
The door can be opened if the water level is suitable. Door open
symbol flashes until the loading door gets ready to be opened. The
symbol’s light is steady when the door is ready to open. You can
open the door to add/take out laundry.
4.11 Cancelling the programme
To cancel the programme, turn the Programme Selection knob
to select another programme. Previous programme will be
cancelled. "End/Cancel" light will flash continuously to notify
that the programme has been cancelled.
C
InformatIons
If you start a new programme after cancelling the previous one,
this new programme will start without draining the water in the
machine.
If you must certainly open the loading door when the “Door
Open” light is off, you need to use “Spin+Pump” programme. See
“Spin+Pump”
re-spinning the laundry
Unbalanced load control system can prevent spinning
because of unbalanced load of laundry in the machine. If you
would like to spin again:
Rearrange the laundry in the machine. Select Spin+Pump
programme and press “Start / Pause" button.
4.12 End of programme
"End/Cancel" light on the programme follow-up indicator will
light up once the programme comes to an end; and "Door
Open" symbol flashes for 1-2 minutes until the door is ready
to open. When "Door Open" symbol is steadily illuminated, the
door can be opened.
To turn off the machine, turn program selection knob to "On
/ Off" position. Take out your laundry and close the loading
door. The machine will be ready for the next run.
4.13 Door open
"Door Open" symbol is illuminated when the door is ready
to open. It flashes until the door gets ready to open. If the
"Door Open" symbol is not illuminated, do not force the door
to open. The symbol's light is steady when the door is ready
to open.
4.14 Your machine is equipped
with a “standby mode”
In case of not starting any programme or waiting without
making any other operation when the machine is turned on
by On/Off button and while it is in selection step or if no other
operation is performed approximately 2 minutes after the
programme you selected has come to an end, your machine
will automatically switch to energy saving mode. Brightness of
indicator lights will decrease. Also, if your product is equipped
with a display showing the programme duration, this display
will completely turn off. In case of rotating the Programme
Selection knob or pressing any button, lights and display
will restore to their previous condition. Your selections made
while exiting the energy saving mode may change. Check
the appropriateness of your selections before starting the
programme. Readjust if necessary. This is not a fault.
