27 / EN
Washing Machine / User’s Manual
• Hand Wash
Use this programme to wash your woolen/delicate clothes that bear “not machine-
washable” tags and for which hand wash is recommended. It washes laundry with a very
gentle washing action to not to damage clothes.
• Daily Quick
Use this programme to wash your lightly soiled cotton clothes in a short time.
•
Xpress Super Short
Use this programme to wash your little amount of lightly soiled cotton clothes in a short
time.
•
Dark Care
Use this programme to wash your dark coloured laundry, or the coloured laundry that you
do not want them get faded. Washing is performed with less mechanical movements at low
temperature. It is recommended to use liquid detergent or wool shampoo for dark coloured
laundry.
• Mixed Fabrics
Use this programme to wash your cotton and synthetic clothes together without sorting
them.
• Intensive
You can wash your durable and heavily soiled clothes on this program. This program washes
for a longer time and an extra rinse cycle will be made compared to the “Cottons” program.
You can use it for your heavily soiled clothes that you wish to be rinsed gently.
• Freshen Up
Use this programme to remove the odour on the laundry that are worn only for once and do
not contain any stains or dirt.
• Eco Clean 20
Use this programme, which is much more sensitive to environment and natural resources,
to wash your lightly soiled and unstained cotton laundry (max. 3.5 kg) in a short time and
economically.
C
It is recommended to use liquid detergent or gel washing detergent.
• Self Clean
Use this programme regularly (once in every 1-2 months) to clean the drum and provide
the required hygiene. Run the programme without any laundry in the machine. To obtain
better results, put powder limescale remover for washing machines into the detergent
compartment II. When the programme is over, leave the loading door ajar so that the inside
of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the
machine detects that there is a load inside and aborts the programme