Beko WMD 65085, Manual

8 - EN

Auxiliary functions

Auxiliary Function Selection Buttons

Select the required auxiliary functions before 

starting the program.

C 

Some combinations cannot be selected 

together. (Ex.: Pre-wash and Quick Wash.

Warning signal on the selected auxiliary 

function will light up.

Auxiliary function selection

If an auxiliary function that should not be 

selected together with a previously selected 

function is chosen, the first selected function 

will be cancelled and the last auxiliary function 

selection will remain active.

(Ex.: If you want to select pre-wash first and 

then quick wash, pre-wash will be cancelled 

and quick wash will remain active.

Auxiliary function that is not compatible 

with the program cannot be selected. (see, 

“Program Selection Table”)

C 

Auxiliary function buttons may differ 

according to the model of your machine.

Pre-wash

A pre-wash is only worthwhile for heavily soiled 

laundry. Without pre-wash you save energy, 

water, detergent and time.

C

 Pre-wash without detergent is 

recommended for lace and curtains.

Quick wash

This function can be used for “Cottons” and 

“Synthetics” programs. It decreases the 

washing times for lightly soiled laundries and 

also the number of rinsing steps.

Rinse Plus

With this function, you can increase the 

number of current rinsing steps. Thus, 

sensitive skins’ risk of being affected by the 

remainder detergent on the clothes will be 

decreased.

Anti-creasing

With this function, drum movement will be 

lessened to prevent creasing and spinning 

speed is limited. In addition, washing is carried 

out at a higher water level.

C

 Whenever you select this auxiliary function, 

load your machine with half of the 

maximum laundry specified in the program 

table.

No Heat

If you wish to wash your clothes in cold water, 

you can use this program.

Time display

The display shows the time remaining for 

the program to complete while a program is 

running. Program duration may differ from the 

values in the consumption table subject to the 

changes in the water pressure, water hardness 

and temperature, ambient temperature, type 

and amount of laundry, auxiliary functions 

selected, and changes in the supply voltage.

Time delay

With the “Time delay” function you can delay 

the program start up to 24 hours. Time delay 

can be set with steps of one hour for the first 

three hours and with steps of three hours for 

the remainder (1, 2, 3, 6, 9, …24).

1. Pres “Time Delay” button to adjust the 

desired time.

2. Press “Start/Pause/Cancel” button. The 

time delay will start to count down. 

C

 More laundry may be loaded during the 

time delay period.

Changing the delay time

If you want to change the time during the 

countdown:

1. Press “Start/Pause/Cancel” button.

2. Pres “Time Delay” button to adjust the 

desired time delay.

3. Press “Start/Pause/Cancel” button.

Canceling the time delay

If you want to cancel the time delay 

countdown and start the program:

1. Press “Start/Pause/Cancel” button.

2. Pres “Time Delay” button to decrease the 

time delay.

3. Press “Start/Pause/Cancel” button to start 

the program.

Starting the Program

1. Press “Start/Pause/Cancel” button to start 

the program.

2. Program follow-up lamp showing the 

startup of the program will light up.

Progress of program

Progress of a running program is shown 

through the program follow-up indicator. At the 

beginning of every program step, the relevant 

indicator lamp will light up and light of the 

completed step will turn off. The symbol that 

is lit up at the far right of the series of symbols 

indicates the step that is being carried out.

C

 If the machine is not spinning, the 

program may be in rinse hold mode or the 

automatic spin correction system has been 

activated due to an excessive unbalanced 

distribution of laundry in the machine.