15 / EN
Washing Machine / User’s Manual
2. Programme follow-up light showing the startup
of the programme will turn on.
C
If no programme is started or no button is
pressed within 1 minute during programme
selection process, the machine will switch to
Pause mode and the illumination level of the
temperature, speed and loading door indicator
lights will dim. Other indicator lights and
indicators will turn off. Once the Programme
Selection knob is rotated or any button is
pressed, indicator lights and indicators will turn
on again.
4.12 Child Lock
Use Child Lock function to prevent children from
tampering with the machine. Thus you can avoid
any changes in a running programme.
C
If the Programme Selection knob is turned
when the Child Lock is active, "Con" appears on
the display. The Child Lock does not allow any
change in the programmes and the selected
temperature, speed and auxiliary functions.
C
Even if another programme is selected with
the Programme Selection knob while the Child
Lock is active, previously selected programme
will continue running.
To activate the Child Lock:
1. and 2. Auxiliary Function buttons are pressed
and held for 3 seconds. The lights on the 1
st
and
2
nd
Auxiliary Function buttons will flash, and "C03",
"C02", "C01" will appear on the display respectively
while you keep the buttons pressed for 3 seconds.
Then, "Con" will appear on the display indicating
that the Child Lock is activated. If you press any
button or turn the Programme Selection knob when
the Child Lock is active, same phrase will appear on
the display. The lights on the 1st and 2nd auxiliary
function buttons that are used to deactivate the
Child Lock will blink 3 times.
To deactivate the Child Lock:
Press and hold 1
st
and 2
nd
auxiliary function buttons
for 3 seconds while any programme is running. The
lights on the 1
st
and 2
nd
Auxiliary Function buttons
will flash, and "C03", "C02", "C01" will appear on the
display respectively while you keep the buttons
pressed for 3 seconds. Then, "COFF" will appear
on the display indicating that the Child Lock is
deactivated.
C
In addition to the method above, to deactivate
the Child Lock, switch the Programme
Selection knob to On / Off position when no
programme is running, and select another
programme.
Child Lock is not deactivated after power
failures or when the machine is unplugged.
4.13 Progress of programme
Progress of a running programme can be followed
from the Programme Follow-up indicator. At
the beginning of every programme step, the
relevant indicator light will turn on and light of the
completed step will turn off.
You can change the auxiliary functions, speed
and temperature settings without stopping the
programme flow while the programme is running.
To do this, the change you are going to make must
be in a step after the running programme step. If
the change is not compatible, relevant lights will
flash for 3 times.
C
If the machine does not pass to the spinning
step, Rinse Hold function might be active or the
automatic unbalanced load detection system
might be activated due to the unbalanced
distribution of the laundry in the machine.
4.14 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
when the water level is unsuitable.
Loading door light will start flashing when the
machine is switched to Pause mode. Machine
checks the level of the water inside. If the level is
suitable, Loading Door light illuminates steadily
within 1-2 minutes and the loading door can be
opened.
If the level is unsuitable, Loading Door light turns
off and the loading door cannot be opened. If
you are obliged to open the Loading Door while
the Loading Door light is off, you have to cancel
the current programme; see "Canceling the
programme".
4.15 Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause button to switch the machine
to pause mode while a programme is running.
The light of the step which the machine is in starts
flashing in the Programme Follow-up indicator to
show that the machine has been switched to the
pause mode.
Also, when the loading door is ready to be opened,
Loading Door light will also illuminate continuously
in addition to the programme step light.
Changing the auxiliary function, speed and
temperature
Depending on the step the programme has
reached, you can cancel or activate the auxiliary
functions; see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
C
If no change is allowed, the relevant light will
flash for 3 times.
Adding or taking out laundry
1. Press Start / Pause button to switch the machine
to pause mode. The programme follow-up light
of the relevant step during which the machine
was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the
laundry.
4. Close the Loading Door.
Summary of Contents for WRE 6532 B0
Page 2: ......
Page 91: ...91 CZ Plně automatická pračka Uživatel Manuální ...
Page 92: ...www beko com ...
