Beko WTB941R4W, User Manual

18 / EN

Washing Machine / User’s Manual

Rinse hold

If you are not going to unload your clothes 

immediately after the programme completes, you 

can use rinse hold function to keep your laundry 

in the final rinsing water in order to prevent them 

from getting wrinkled when there is no water in 

the machine. Press Start / Pause button after this 

process if you want to drain the water without 

spinning your laundry. Programme will resume 

and complete after draining the water.
If you want to spin the laundry held in water, 

adjust the Spin Speed and press Start / Pause 

button. The programme will resume. Water is 

drained, laundry is spun and the programme is 

completed.

C

INFORMATION

• 

If the programme has not reached 

the spinning step, you can change 

the speed without switching the 

machine to Pause mode.

4.3.10 Auxiliary function selection

Select the desired auxiliary functions before 

starting the programme. Furthermore, you may 

also select or cancel auxiliary functions that 

are suitable to the running programme without 

pressing the Start / Pause button when the 

machine is operating. For this, the machine 

must be in a step before the auxiliary function 

you are going to select or cancel. If the auxiliary 

function cannot be selected or canceled, light 

of the relevant auxiliary function will blink 3 

times to warn the user.

C

INFORMATION

• 

If a second auxiliary function conflicting 

with the first one is selected before starting 

the machine, the function selected first 

will be canceled and the second auxiliary 

function selection will remain active.

• 

An auxiliary function that is not compatible 

with the programme cannot be selected. 

(See, "Programme and consumption table")

• 

Auxiliary Function buttons may vary 

according to the model of the machine.

4.3.10.1 Auxiliary functions

• Prewash

A Prewash is only worthwhile for heavily soiled 

laundry. Not using the Prewash will save 

energy, water, detergent and time.

C

INFORMATION

• 

Prewash without detergent is 

recommended for tulle and curtains.

• Fast+

When this function is selected, the durations of 

the relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, 

high mechanic activity and optimum water 

consumption, high washing performance is 

achieved in spite of the reduced duration.

•

Extra Rinse

This function enables the product to make 

another rinsing in addition to the one already 

made after the main wash. Thus, the risk for 

sensitive skins (babies, allergic skins, etc.) to 

be effected by the minimal detergent remnants 

on the laundry can be reduced.

4.3.10.2 Functions/Programmes 

Selected by Pressing the Function 

Buttons for 3 Seconds

• Drum Clean 3

ll

Press and hold the auxiliary function button 1 

for 3 seconds to select the programme.
Use regularly (once in every 1-2 months) 

to clean the drum and provide the required 

hygiene. Operate the programme while the 

machine is completely empty. To obtain 

better results, put powder lime-scale remover 

for washing machines into the detergent 

compartment no. “2”. When the programme 

is over, leave the loading door ajar so that the 

inside of the machine gets dry.

C

INFORMATION

• 

This is not a washing programme. 

It is a maintenance programme.

• 

Do not run the programme when there 

is something in the machine. If you try to 

do so, the machine detects that there is 

load inside and aborts the programme.