Beko WTB941R4W, User Manual

20 / EN

Washing Machine / User’s Manual

4.3.12 Starting the programme

1.  Press Start/Pause button to start the 

programme.

2.  Programme follow-up light showing the 

startup of the programme will turn on.

C

INFORMATION

• 

If no programme is started or no button is 

pressed within 1 minute during programme 

selection process, the machine will switch 

to Pause mode and the illumination level 

of the temperature, speed and loading 

door indicator lights will decrease. Other 

indicator lights and indicators will turn off. 

Once the Programme Selection knob is 

rotated or any button is pressed, indicator 

lights and indicators will turn on again.

4.3.13 Progress of programme

Progress of a running programme can be 

followed from the Programme Follow-up 

indicator. At the beginning of every programme 

step, the relevant indicator light will turn on and 

light of the completed step will turn off.
You can change the auxiliary functions, speed 

and temperature settings without stopping 

the programme flow while the programme 

is running. To do this, the change you are 

going to make must be in a step after the 

running programme step. If the change is not 

compatible, relevant lights will flash for 3 times.

C

INFORMATION

• 

If the machine does not pass to the spinning 

step, Rinse Hold function might be active or the 

automatic unbalanced load detection system 

might be activated due to the unbalanced 

distribution of the laundry in the machine.

4.3.14 Loading door lock

There is a locking system on the loading door of 

the machine that prevents opening of the loading 

door in cases when the water level is unsuitable.

Loading door light will start flashing when the 

machine is switched to Pause mode. Machine 

checks the level of the water inside. If the level is 

suitable, Loading Door light illuminates steadily within 

1-2 minutes and the loading door can be opened.

If the level is unsuitable, Loading Door light 

turns off and the loading door cannot be 

opened. If you are obliged to open the Loading 

Door while the Loading Door light is off, you 

must cancel the current programme. See. 

"Cancelling the programme" 

4.3.15 Changing the selections 

after programme has started

Switching the machine to pause mode

Press the Start / Pause button to switch the 

machine to pause mode while a programme 

is running. The light of the step which the 

machine is in starts flashing in the Programme 

Follow-up indicator to show that the machine 

has been switched to the pause mode. 
Also, when the loading door is ready to be 

opened, Loading Door light will also illuminate 

continuously in addition to the programme step light.

Changing the auxiliary function, speed and 

temperature

Depending on the step the programme has 

reached, you can cancel or select the auxiliary 

functions. See, "Auxiliary function selection". 
You can also change the speed and 

temperature settings. See, "Spin speed 

selection" and "Temperature selection".

C

INFORMATION

• 

If no change is allowed, the 

relevant light will flash 3 times.

Adding or taking out laundry

1.  Press Start / Pause button to switch the 

machine to pause mode. The programme 

follow-up light of the relevant step during 

which the machine was switched into the 

pause mode will flash.

2.  Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out 

the laundry.

4.  Close the Loading Door.
5. Make changes in auxiliary functions, 

temperature and speed settings if necessary.

6. Press Start / Pause button to start the machine.

4.3.16 Cancelling the programme

To cancel the programme, turn the Programme 

Selection knob to select another programme. 

Previous programme will be cancelled. End / 

Cancel light will flash continuously to notify that 

the programme has been canceled. 
Your machine will end the programme when you 

turn the Programme Selection knob; however, 

it does not drain the water inside. When you 

select and start a new programme, the newly 

selected programme will start depending on the 

step the previous programme was canceled in.