Beko WTE 7502 B0S, User Manual

15 /  EN

Washing Machine / User’s Manual

To deactivate the Child Lock:

Press and hold 1

st

 and 2

nd

 auxiliary function buttons for 3 

seconds while any programme is running. The lights on the 

1

st

 and 2

nd

 Auxiliary Function buttons will flash, and "C03", 

"C02", "C01" will appear on the display respectively while 

you keep the buttons pressed for 3 seconds. Then, "COFF" 

will appear on the display indicating that the Child Lock is 

deactivated.

C

In addition to the method above, to deactivate the Child 

Lock, switch the Programme Selection knob to On / 

Off position when no programme is running, and select 

another programme. 
Child Lock is not deactivated after power failures or 

when the machine is unplugged.

4.13 Progress of programme

Progress of a running programme can be followed from the 

Programme Follow-up indicator. At the beginning of every 

programme step, the relevant indicator light will turn on and 

light of the completed step will turn off.

You can change the auxiliary functions, speed and 

temperature settings without stopping the programme flow 

while the programme is running. To do this, the change 

you are going to make must be in a step after the running 

programme step. If the change is not compatible, relevant 

lights will flash for 3 times.

C

If the machine does not pass to the spinning step, Rinse 

Hold function might be active or the automatic unbalanced 

load detection system might be activated due to the 

unbalanced distribution of the laundry in the machine.

4.14 Loading door lock

There is a locking system on the loading door of the 

machine that prevents opening of the door in cases when 

the water level is unsuitable.

Loading door light will start flashing when the machine 

is switched to Pause mode. Machine checks the level of 

the water inside. If the level is suitable, Loading Door light 

illuminates steadily within 1-2 minutes and the loading door 

can be opened. 

If the level is unsuitable, Loading Door light turns off and the 

loading door cannot be opened. If you are obliged to open 

the Loading Door while the Loading Door light is off, you 

have to cancel the current programme; see "Canceling the 

programme". 

4.15 Changing the selections after 

programme has started

Switching the machine to pause mode

Press the Start / Pause button to switch the machine to 

pause mode while a programme is running. The light of 

the step which the machine is in starts flashing in the 

Programme Follow-up indicator to show that the machine 

has been switched to the pause mode. 

Also, when the loading door is ready to be opened, Loading 

Door light will also illuminate continuously in addition to the 

programme step light.

Changing the speed and temperature settings for 

auxiliary functions

Depending on the step the programme has reached, you 

may cancel or activate the auxiliary functions; see, "Auxiliary 

function selection". 

You may also change the speed and temperature settings; 

see, "Spin speed selection" and "Temperature selection".

C

If no change is allowed, the relevant light will flash for 

3 times.

Adding or taking out laundry

Press the Start / Pause button to switch the machine to 

pause mode. The programme follow-up light of the relevant 

step during which the machine was switched into the pause 

mode will flash. Wait until the Loading Door can be opened. 

Open the Loading Door and add or take out the laundry. 

Close the Loading Door. Make changes in auxiliary functions, 

temperature and speed settings if necessary.  Press Start / 

Pause button to start the machine. 

4.16 Canceling the programme

To cancel the programme, turn the Programme Selection 

knob to select another programme. Previous programme 

will be canceled. End / Cancel light will flash continuously to 

notify that the programme has been canceled. 

Pump function is activated for 1-2 minutes regardless of the 

programme step, and whether there is water in the machine 

or not. After this period, your machine will be ready to start 

with the first step of the new programme.

C

Depending on the step where the programme was 

canceled in, you may have to put detergent and 

softener again for the programme you have selected 

anew.

4.17 End of programme

“End” appears on the display at the end of the programme. 

Wait until the loading door light illuminates steadily. Press On 

/ Off button to switch off the machine. Take out your laundry 

and close the loading door. Your machine is ready for the 

next washing cycle.

4.18 Your machine is equipped 

with a “Standby Mode”

In case of not starting any programme or waiting without 

making any other operation when the machine is turned 

on by On/Off button and while it is in selection step or if 

no other operation is performed approximately 2 minutes 

after the programme you selected has come to an end, 

your machine will automatically switch to energy saving 

mode. Brightness of indicator lights will decrease.  Also, 

if your product is equipped with a display showing the 

programme duration, this display will completely turn off. In 

case of rotating the Programme Selection knob or pressing 

any button, lights and display will restore to their previous 

condition. Your selections made while exiting the energy 

saving mode may change. Check the appropriateness of 

your selections before starting the programme. Readjust if 

necessary. This is not a fault.