Beko WTE12745 X0D, User Manual

12 / EN

Washing Machine / User’s Manual

MAX

• 

When adding liquid detergent or softener, do not exceed the tip of 

the «Max» label. 

• 

Close the lid.

• 

Close the detergent drawer by pushing it slowly.

• 

After closing the detergent drawer, the flashing dosing symbol (

) 

will start to light up steadily.

• 

Indicates that the components are filled and the drawer is closed.

• 

For coloured and white laundry, it is recommended to fill commonly used liquid detergent in the 

compartment.

• 

Despite the fact that the detergent compartments are filled, if 'detergent symbol ' continues to flash, the 

detergent drawer is not fully closed. Ensure that the drawer is seated in place by pushing it.

A

WARNING: 

While the detergent drawer is full with detergent and/or softener:

a- Do not pull the machine,
b- Do not change its place,
c- Do not tilt the machine to its side or back,

WARNING: 

To make these actions, first you should take out the drawer from the machine.

WARNING: 

If you wish to start the programme when there is no detergent in the detergent drawer, please remember 

that you must cancel the liquid detergent dosing and wash the laundry with powder detergent.

WARNING: 

The liquid detergent dosing container must be filled only with liquid detergent, and the softener dosing 

container only with softener. Filling these compartments with any kind of liquid or powder chemical other than these may 
harm your laundry or washing machine.

4.2.6.2 Dose Selection and Cancellation or Powder Detergent Use

• 

For some programmes of the machine, liquid detergent could not be selected. In such cases, powder 

detergent should be used. Please see the Programme Table for details.

• 

After selecting the temperature, spin speed and auxiliary function, start the programme by pressing the 

started/pause button.

• 

The machine will measure the load, and determine the detergent amount depending on the load amount 

and selected functions. During the washing operation, the detergent intake is not visible, it will be taken 

in directly with the water.

• 

If it is requested to use powder detergent in programmes where detergent dosing system activates 

required amount of powder detergent should be added to the detergent compartment. If you wish to use 

the detergent compartment in the middle, you need to cancel your liquid detergent selection.

• 

Programme is started by pressing Start/Pause button. When the machine starts to take in water, the 

powder detergent will also be taken in.

• 

If you want to use a liquid detergent whose characteristics are different than that of the detergent in 

the liquid detergent compartment for once, you must add the different liquid detergent into the middle 

powder detergent compartment and cancel your liquid detergent selection. 

• 

Softener will be taken in through the detergent dosing system.