Beko WTE12745 X0D, User Manual

21 / EN

Washing Machine / User’s Manual

If you want to spin your laundry after the Rinse Hold function:

- Adjust the 

Spin Speed

.

- Press 

Start / Pause / Cancel

 button. The programme will resume. Machine drains the water and spins the 

laundry.

If you want to drain the water at the end of the programme without spinning, use 

No Spin

 function.

C

No change can be made in programmes where spin speed adjustment is not allowed.

You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be 

made if the steps do not allow it. 

Rinse hold

If you are not going to unload your clothes immediately after the programme completes, you can use rinse 

hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled 

when there is no water in the machine. Press Start / Pause button after this process if you want to drain the 

water without spinning your laundry. Programme will resume and complete after draining the water.

If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.

The programme will resume. Water is drained, laundry is spun and the programme is completed.

4.3.8 Auxiliary function selection

Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, 

frames of the auxiliary function symbol that can be selected together with it illuminates. And when you select 

an auxiliary function, the interior area of the auxiliary function symbol also starts to illuminate.

C

Frame of the auxiliary function symbol that cannot be selected with the current programme does not illuminate. 

Also the frames of the auxiliary function suitable for the current programme after the washing has started 

remains illuminated. You can select or cancel the auxiliary functions whose frames are illuminated. If the wash 

cycle has reached a point where you cannot select the auxiliary function, the function's frame turns off.

C

Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before 
starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain 
active. For example, if you want to select Quick Wash after you have selected the Additional Water, Additional Water will be 
canceled and Quick Wash will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See, "Programme and consumption table")
Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The 
frame of the auxiliary function will not be illuminated, only inner area will be illuminated.