Beko WTE12745 X0D, User Manual

9 / EN

Washing Machine / User’s Manual

4.1.6 Adjusting the feet

A

CAUTION: 

In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced 

on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing 
and vibration problems.

CAUTION: 

Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

1 

Loosen the lock nuts on the feet by hand.

2 

Adjust the feet until the product stands in a stable and balanced way.

3.  Tighten all lock nuts by hand again.

4.1.7 Electrical connection

Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any 

damages that will arise when the product is used without grounding in accordance with the local regulations.

•  Connection must comply with national regulations.

•  The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements. Use of a 

Groud Fault Circuit Interrupter (GFCI) is recommended.

•  Power cable plug must be within easy reach after installation.

•  If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician 

install a 16 Amp fuse.

•  The voltage specified in the "Technical specifications" section must be equal to your mains voltage.

•  Do not make connections via extension cables or multi-plugs.

B

CAUTION: 

Damaged power cables must be replaced by the Authorised Service Agents.

4.1.8 Initial use

Before starting to use the product make sure that the preparations are 
made which are in line with the “Important Safety and Environment 
Instructions” and the instructions in the “Installation” section.
To prepare the product for washing laundry, perform first operation 
in Drum Cleaning programme. If this program is not available in your 
machine, apply the method which is described in the section 4.4.2.

C

Use an anti-limescale suitable for the washing machines.

Some water might have remained in the product due to the quality control processes in the production. It is not harmful for 
the product.