47 / EN
Washing Machine / User’s Manual
C
The auxiliary functions in the table may vary according to the model of your machine.
Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient
temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences
may occur between the time shown on the display and the real washing time.
“Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be added or
removed.”
“The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your
machine.”
"The manufacturer reserves the right to make modifications in the programmes and auxiliary functions given in the table. While these
modifications will not change the machine performance, programme steps and durations can be changed."
4.3.8 Auxiliary function selection
C
When you try to change an auxiliary function that is not allowed to be selected with the current programme, indicator light
of the relevant auxiliary function will not flash, only an audio warning is given. Frames of available options will be lit.
If a second auxiliary function conflicting with the first one is selected before starting the product, the function selected first
will be cancelled and the second auxiliary function selection will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See „Programme and consumption
table“)
Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The
frame of the auxiliary function will not be illuminated, only inner area will be illuminated.
Select the desired auxiliary functions before starting the programme.
Light of the selected auxiliary function turns on.
C
You may select or cancel auxiliary functions suitable for the current programme after the washing has started. If the wash
cycle has reached a point where no auxiliary function can be selected, an audio warning will be given.
• Voorwas (Prewash)
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water,
detergent and time.
• Extra Spoelen (Rinse Plus)
This function enables the product to make another rinsing in addition to the one already made after the main
wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
• Anti-kreuk (Anti-Creasing)
This function creases the clothes lesser when they are being washed. Drum movement is reduced and spin
speed is limited to prevent creasing. In addition, more water is used during washing.
4.3.9 End Time
C
Do not use
liquid detergents when you activate End Time function! There is the risk of staining of the clothes.
When the End Time selection is completed, the time appears on the display is the the end time chosen plus the duration of
the selected programme.
1 With the End Time function, the startup of the programme can be delayed up to 24 hours. After pressing
End Time button, the programme‘s estimated ending time is displayed. If the End Time is adjusted, End
Time indicator is illuminated.
2 Open the loading door, place the laundry and put detergent, etc.
3 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
4 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.
5 Close the loading door.
6 Press the Start / Pause button. Time countdown starts. “:” symbol in the middle of the end time on the
display starts flashing and the loading door locks down.
C
The product enters standby mode 10 sec after pressing Start / Pause button if the loading door is not closed and End Time
Setting Symbol indicator and Start / Pause light starts flashing.
