12 / EN
Washing Machine / User’s Manual
•
The machine will measure the load, and determine the detergent amount depending on the load amount
and selected functions. During the washing operation, the detergent intake is not visible, it will be taken
in directly with the water.
•
If it is requested to use powder detergent in programmes where detergent dosing system activates
required amount of powder detergent should be added to the detergent compartment. If you wish to use
the detergent compartment in the middle, you need to cancel your liquid detergent selection.
•
Program is started by pressing Start/Pause button. When the machine starts to take in water, the
powder detergent will also be taken in.
•
If you want to use a liquid detergent whose characteristics are different than that of the detergent in
the liquid detergent compartment for once, you must add the different liquid detergent into the middle
powder detergent compartment and cancel your liquid detergent selection.
•
The softener will be taken in through the dosing system.
Liquid detergent and softener dosing symbols will be active or inactive depending on the programme selected
on the display.
•
If the liquid detergent symbol is on, this means that liquid detergent dosing is active.
•
If the softener symbol is on, this means that softener dosing is active.
•
If the liquid detergent symbol is off, this means that you can wash your laundry with powder detergent.
•
If the softener symbol is off, this means no softener will be used in the rinsing step.
The first position on the display: means liquid detergent and softener are on.
If liquid detergent and softener symbols are active on the display, and if you press the
Auto Dosing button, liquid detergent will be off and powder detergent will be on.
If you press and hold the Auto Dosing button for 3 seconds, softener will be off.
4.2.6.3 When the detergent and/or softener run(s) out:
•
When the detergent or softener in the detergent compartment runs out, the “dosing symbol” on the
display will flash. When this symbol flashes, you need to add detergent or softener to the dosing
compartment. The product can dose for 2 to 3 cycles as of the moment that the symbol flashes.
4.2.6.4 Adding detergent or softener to the wrong compartment:
•
If the detergent or softener is added to the wrong compartments, see 4.4.1 “Cleaning the detergent
drawer”.
