23 / EN
Washing Machine / User’s Manual
• Bluetooth
You can use the Bluetooth connection function to pair your machine with your smart device. This way, you can use your smart
device to get information about your machine and control it.
To enable Bluetooth:
Press and hold the Remote Control function button
for 3 seconds. You will see the countdown
“3-2-1”
and the Bluetooth symbol will turn on. Release the
Remote Control function button
. The Bluetooth icon will
flash while the product is being paired with the smart device. If the connection is successful, the light of the
icon will remain on.
To disable Bluetooth:
Press and hold the Remote Control function button
for 3 seconds. You will see the countdown
“3-2-1”
and the Bluetooth symbol will turn off.
C
You must complete the first setup of the HomeWhiz app for Bluetooth to be enabled. After the setup, if you press the Remote
Control function button while the button is in the Programme Download/Remote Control position, the Bluetooth connection
will be enabled automatically.
4.3.9 End Time
Time display
While the programme is running, the time remaining to the end of the programme will be displayed in hours
and minutes, e.g. “01:30”.
C
Programme time may differ from the values in section "Programme and consumption table" depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected
and the changes in the mains voltage.
With the
End Time
function, start of the programme can be delayed up to 24 hours. After pressing
End Time
button, the programme's estimated end time will be displayed. If the
End Time
is set,
End Time
indicator will
turn on.
To ensure that the End Time function is enabled and the program ends at the end of the defined duration, you
should press
Start / Pause
after setting the duration.
If you want to cancel the End Time function, turn the knob to
on/off
position.
C
If you enable the End Time function, do not add liquid detergent into the powder detergent compartment 2. Stains might
remain on the clothes.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Press the
End Time
button to set the desired end time.
End Time
indicator will turn on.
4 Press the
Start/Pause
button. Countdown starts. “:” sign in the middle of the end time on the display will
start flashing.
C
The loading door will be locked while End Time is enabled.
During the End Time countdown, you can add laundry into the machine. (See 4.3.12). At the end of the countdown, End Time
indicator will turn off, washing cycle will start and the duration of the selected will be displayed.
When End Time is selected, the time shown on the display is the end time.
