25 / EN
Washing Machine / User’s Manual
•
Remove the loading door emergency handle behind the filter cover with
a tool.
•
Open the loading door by pulling the loading door emergency handle
downwards.
•
Try to pull the handle downwards again if the loading door is not opened.
•
Bring the loading door emergency handle to its original position after
opening the loading door.
4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started
:
When you press the
Start / Pause
button, if the level of water inside the machine is suitable (if add laundry
icon
is on), the door lock will be disabled and the door will open so that you can add laundry. When the
door lock is disabled, the door lock symbol on the display will disappear. After adding the laundry, close the
door and press
Start/Pause
again to continue the washing cycle.
When you press
Start/Pause
, if the water level in the machine is not sufficient (if add laundry icon
is
off), the door lock will not be disabled and the door lock symbol will still be shown on the display.
C
If the temperature of the water inside the machine is above 50°C, you cannot disable the door lock even if the water level
is suitable.
Switching the machine to pause mode:
Press the
Start/Pause
button to switch the machine to pause mode. Start / Pause symbol will flash on the display.
Changing the programme selection after the programme has started:
If Child Lock is not enabled, you can change programme by turning the programme selection knob while the
current programme is running. This will cancel the current programme.
C
The selected programme will start anew.
Changing the auxiliary function, speed and temperature
Depending on the step the current programme has reached, you can cancel or enable auxiliary functions. See
“Auxiliary function selection”
You can also change the speed and temperature settings. See "Spin speed selection" and "Temperature selection".