68 / RO
Maşina de spălat / Manualul de utilizare
5
Depanare
Problemă
Cauză
Soluție
Programele nu pornesc după ce
ușa de serviciu este închisă.
Butonul Pornire / Pauză / Anulare nu a fost apăsat.
• *Apăsați butonul Pornire / Pauză / Anulare.
Poate fi dificil să închideți ușa în caz de
încărcare excesivă.
• Reduceți cantitatea de rufe și verificați că ușa se
închide în mod corespunzător.
Programul nu poate fi pornit sau
selectat.
Produsul s-a comutat către modul de protecție a
mașinii din cauza unei probleme de alimentare
(tensiune, presiune apă etc.).
• Apăsați și țineți apăsat butonul Pornit / Oprit
timp de 3 secunde pentru a reveni la setările din
fabrică. (Vezi „Anularea programului”)
Apă în interiorul mașinii de spălat.
Este posibil ca în mașină să existe apă rămasă din
timpul proceselor de control al calității.
• Aceasta nu este o defecțiune; apa nu este
periculoasă pentru mașină.
Mașina nu se alimentează cu apă.
Robinetul este închis.
• Deschideți robinetele.
Furtunul de alimentare cu apă este îndoit.
• Întindeți furtunul.
Filtrul de alimentare cu apă este înfundat.
• Curățați filtrul.
Ușa de serviciu nu este închisă.
• Închideți ușa.
Mașina nu evacuează apă.
Furtunul de evacuare al apei este înfundat sau răsucit.
• Curățați sau întindeți furtunul.
Filtrul pompei este înfundat.
• Curățați filtrul pompei.
Mașina vibrează sau face zgomot.
Mașina nu este echilibrată.
• Echilibrați mașina prin reglarea picioarelor.
O substanță puternică a pătruns în filtrul pompei.
• Curățați filtrul pompei.
Șuruburile de fixare pentru transport nu au fost
demontate.
• Demontați șuruburile de fixare pentru transport.
Cantitatea de rufe din mașină este prea mică.
• Adaugați mai multe rufe în mașină.
O cantitate excesivă de rufe a fost introdusă în
mașină.
• Scoateți o parte din rufele din mașină sau
distribuiți-le manual în mașină pentru a o
echilibra.
Produsul se sprijină de un articol rigid.
• Asigurați-vă că mașina nu se sprijină de alte
obiecte.
Există scurgere de apă prin partea
inferioară a mașinii.
Furtunul de evacuare al apei este înfundat sau răsucit.
• Curățați sau întindeți furtunul.
Filtrul pompei este înfundat.
• Curățați filtrul pompei.
Mașina s-a oprit imediat după
începerea programului.
Mașina de spălat s-a oprit temporar din cauza
tensiunii joase.
• Își va relua programul când tensiunea va ajunge
la un nivel normal.
Mașina evacuează apa imediat
după alimentare.
Furtunul de evacuare nu se află la înălțimea potrivită.
• Conectați furtunul de evacuare conform
instrucțiunilor din manualul de utilizare.
În timpul spălării nu se vede apa
din mașină.
Apa se află în partea invizibilă a produsului.
• Aceasta nu reprezintă o defecțiune.
Ușa de serviciu nu poate fi
deschisă.
Blocarea ușii de serviciu este activată datorită
nivelului apei din produs.
• Evacuați apa folosind programul Evacuare sau
Centrifugare.
Mașina încălzește apa sau este în etapa de
centrifugare.
• Așteptați terminarea programului.
Ușa de serviciu poate fi blocată de presiunea
exercitată asupra sa.
• Prindeți mânerul și împingeți și trageți de ușă
pentru a o elibera și a o deschide.
Dacă nu este alimentată, ușa de serviciu a mașinii nu
se va deschide.
• Pentru a deschide ușa de serviciu, deschideți
capacul filtrului pompei și trageți mânerul de
urgență poziționat în partea din spate a acestui
capac. Consultați „Blocarea ușii de serviciu”