Beko WTV7742A1, User Manual

27 / EN

Washing Machine / User’s Manual

4.3.15.3 Remote Control function and its use

After HomeWhiz setup, bluetooth will automatically turn on. To activate or deactivate the bluetooth connection, 

please see 4.3.8.2 Bluetooth 3’’’.

If you turn off and on your machine while bluetooth is active, it will automatically reconnect. In cases such as 

paired device going off the range, bluetooth will automatically turn off. For this reason, you will need to turn on 

the bluetooth again if you want to use the Remote Control function.

You can check the bluetooth symbol on the display to track your connection status. If the symbol is 

continuously on, you have bluetooth connection. If the symbol is flashing, the product is trying to connect. If 

the symbol is off, you have no connection.

A

WARNING: 

When the bluetooth connection is on in your product, Remote Control function will be selectable. 

If the Remote Control function cannot be selected, check the connection status. If the connection cannot be established, 
repeat the initial set-up settings on the appliance.

WARNING: 

For safety reasons, the product’s door will remain locked while the Remote Control function is enabled, 

independently of the operating mode. If you want to open the door of the product, you will need to turn the programme 
selection knob or press the remote control key to deactivate the remote control function.

When you want to control your washing machine remotely, you need to activate the Remote Control function 

by pressing the Remote Control button while the programme knob is in the Download Programme/Remote 

Control position button on the control panel of your washing machine. When your product is accessed, you will 

see a screen similar to the below.

When the Remote Control is on, you can only manage, turn-off and status follow-up operations through your 

washing machine. And all functions except child lock can be managed through the application.

You can follow whether the Remote Control function is On or Off through the function indicator on the button.

If the Remote Control function is Off, all the operations are handled on the washing machine and only status 

follow-up is allowed on the application.

In the event that Remote Start function cannot be turned on, appliance will make a warning sound when 

you press the button. This might happen in cases such as when the appliance is turned on and there is no 

paired smart device via bluetooth. Bluetooth settings being Off or the washing machine's door being open are 

examples for such cases.

Once you activate this function on the washing machine, it will remain enabled apart from certain conditions 

and allow you to control your washing mahine remotely via bluetooth.

In certain cases, it deactivates itself for safety reasons:

•   When your washing machine undergoes a power interruption.

•  When programme knob is turned and a different programme selected or appliance is turned off.

4.3.15.4 Troubleshooting

Do the following if you have a problem with controlling or connection. Observe whether the problem persists or 

not after the action you have performed. Do the following if the problem is not resolved.

•  Check whether your smart device is connected to the relevant home network.

•  Restart the product application.

•  Turn bluetooth off and then on via user control panel.

•  If the connection cannot be established with the above processes, repeat the initial set-up settings on the 

washing machine.

If the problem persists, consult an Authorised Service Agent.