Beko WTV8725XCW1, User Manual

16 / EN

Washing Machine / User Manual

4.3.10 Auxiliary function selection

Select the desired auxiliary functions before 

starting the programme. You can also select 

or cancel auxiliary functions suitable for the 

running programme without pressing the Start/

Pause button while the machine is operating. 

To do this, the machine must be in a step 

before the auxiliary function you are going to 

select or cancel. If the auxiliary function cannot 

be selected or cancelled, light of the relevant 

function will flash 3 times to warn the user.

C

INFORMATION

•  If a second auxiliary function conflicting with 

the first one is selected before starting the 

machine, the function selected first will be 

cancelled and the second auxiliary function 

selection will remain active.

•  An auxiliary function which is not compatible 

with the programme cannot be selected. 

(See "Programme and consumption table")

•  Auxiliary Function buttons may vary 

according to the model of the machine.

4.3.10.1 Auxiliary functions

•

 Voorwas (Prewash)

A Prewash is only worthwhile for heavily soiled 

laundry. Not using the Prewash will save 

energy, water, detergent and time.

C

INFORMATION

•  Prewash without detergent is 

recommended for tulle and curtains.

• Fast+

When this function is selected, durations of 

relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, 

high mechanic activity and optimum water 

consumption, high washing performance is 

achieved in spite of the reduced duration.

•

 Extra Spoelen (Extra Rinse)

This function enables the machine to carry 

out another rinsing cycle in addition to the 

one carried out after the main wash. Thus, the 

risk for sensitive skins (babies, allergic skins, 

etc.) to be effected by the minimal detergent 

remnants on the laundrwy can be reduced.

4.3.8 Temperature selection

Whenever a new programme is selected, the 

recommended temperature for the selected 

programme appears on the temperature indicator.
To decrease the temperature, press the 

Temperature Adjustment button. Temperature 

will decrease gradually. When the cold level is 

selected, temperature level lights will not be on.

C

INFORMATION

•  If the programme has not reached the heating 

step, you can change the temperature without 

switching the machine to Pause mode.

4.3.9 Spin speed selection

Whenever a new programme is selected, the 

recommended spin speed of the selected 

programme is displayed on the spin speed indicator.
To decrease the spin speed, press the Spin 

Speed Adjustment button. Spin speed decreases 

gradually. Then, depending on the model of the 

product, "Rinse Hold" and "No Spin" options 

appear on the display. When the “No Spin” function 

is selected, rinse level indicator lights will not be on.

Rinse hold

If you are not going to unload your clothes 

immediately after the programme ends, you can use 

rinse hold function to keep your laundry in the final 

rinsing water in order to prevent them from getting 

wrinkled when there is no water in the machine. 

Press Start/Pause button after this process if you 

want to drain the water without spinning your 

laundry. Programme will resume where it left off, 

drain the water and then it will be complete.
If you want to spin the laundry held in water, adjust 

the Spin Speed and press Start/Pause button. 

Programme will resume. Water will be drained, 

laundry will be spun and the programme will end.

C

INFORMATION

•  If the programme has not reached the spin 

step, you can change the spin speed without 

switching the machine to Pause mode.