background image

8 / EN

Washing Machine / User Manual

•  The wiring for the electrical outlet circuit 

must be sufficient to meet the appliance 

requirements. Use of a Groud Fault Circuit 

Interrupter (GFCI) is recommended.

•  Power cable plug must be within easy reach 

after installation.

•  If the current value of the fuse or breaker 

in the house is less than 16 Amps, have a 

qualified electrician install a 16 Amp fuse.

•  The voltage specified in the "Technical 

specifications" section must be equal to 

your mains voltage.

•  Do not make connections via extension 

cables or multi-plugs.

A

 CAUTION!

•  Damaged power cables must be replaced 

by the Authorised Service Agents.

4.1.8 Initial use

Before starting to 

use the product 

make sure that 

the preparations 

are made which 

are in line with the 

“Important Safety

and Environment Instructions” and the 

instructions in the “Installation” section.
To prepare the product for washing laundry, 

perform first operation in Drum Cleaning 

programme. If this program is not available 

in your machine, apply the method which is 

described in the section 4.4.2.

C

INFORMATION

•  Use an anti-limescale suitable for the 

washing machines.

•  Some water might have remained in 

the product due to the quality control 

processes in the production. It is not 

harmful for the product.

4.2 Preparation

4.2.1 Sorting the laundry

•  Sort laundry according to type of fabric, 

colour, and degree of soiling and allowable 

water temperature.

•  Always observe the instructions given on 

the garment care labels.

4.2.2 Preparing laundry for washing

•  Laundry items with metal attachments 

such as, underwiring, belt buckles or metal 

buttons will damage the product. Remove 

the metal pieces or wash such clothes by 

putting them in a laundry bag or pillow case.

•   Take out all substances in the pockets such 

as coins, pens and paper clips, and turn 

pockets inside out and brush. Such objects 

may damage the product or cause noise 

problem.

•  Put small size clothes such as infant's socks 

and nylon stockings in a laundry bag or 

pillow case.

•  Place curtains in without compressing them. 

Remove curtain attachment items.

•  Fasten zippers, sew loose buttons and 

mend rips and tears.

•  Wash “Machine washable” or “Hand 

washable” labelled products only with an 

appropriate programme.

•  Do not wash colours and whites together. 

New, dark coloured cottons release a lot of 

dye. Wash them separately.

•  Tough stains must be treated properly 

before washing.

•  Only use the dyes / colour changers and 

descaling agents which are appropriate 

for machine wash. Always follow the 

instructions on the package.

•  Wash trousers and delicate laundry turned 

inside out.

•  Keep laundry items made of Angora wool in 

a plastic bag in the freezer for a few hours 

before washing. This can reduce piling.

•  Laundry that are subjected to materials 

such as flour, lime dust, milk powder, etc. 

intensely must be shaken off before placing 

into the product. Such dusts and powders 

on the laundry may build up on the inner 

parts of the product in time and can cause 

damage.

Summary of Contents for WTV8725XCW1





























Reviews: