42 / EN
Washing Machine / User’s Manual
Problem
Reason
Solution
Foam is overflowing from
the detergent drawer.
Too much detergent is used.
• Mix 1 tablespoonful softener and
½ l water and pour into the main
wash compartment of the detergent
drawer.
• Put detergent into the product
suitable for the programmes and
maximum loads indicated in the “4.6.3
Programme and consumption table”.
When you use additional chemicals
(stain removers, bleaches and etc),
reduce the amount of detergent.
Laundry remains wet at the
end of the programme. (*)
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
• Use recommended amount of
detergent.
(*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to
prevent any damage to the product and to its surrounding environment. Laundry should be rearranged and re-
spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
A
CAUTION:
If you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or an Authorised Service Agent. Never try to repair a nonfunctional
product yourself.
Summary of Contents for WX943440W
