DIGITAL AUDIO INPUT-OUTPUT
The digital interface is AES/EBU compatible at a sampling rate of 48kHz. A sample
rate converter is used on the input allowing the conversion of 32kHz, 44.1kHz digital
sources to 48kHz. The digital REF AES input can be used with sampling rates other than
48kHz but the unit is optimised for 48kHz.
The digital output is always operating concurrently with the analog output. The
source, however, is
either
analog or digital.
DIGITAL REFERENCING:-
1)
Audio in - The BEL 6110 locks to incoming AES signal connected to the AES
digital input.
2)
AES - The BEL 6110 locks to the external AES signal connected to the AES
REF digital input. (48kHz)
3)
Word - The BEL 6110 locks to the external word signal connected to the word
input. (48kHz) (TTL levels)
4)
Video - The BEL 6110 locks to the external video signal PAL or NTSC (auto
select) connected to the video input. (1V Pk/Pk)
5)
Internal - The BEL 6110 locks to the internal crystal oscillation. (48kHz
±25ppm)
POWER-UP
On power-up, the LCD will show the Model Number, The Version Number and the
maximum audio memory fitted (either 8, 16 or 32 Mbyte). This display remains for a few
seconds, before resetting to the STOP mode. (A slight flickering of the display is normal
during this time, as the memory is being purged of random data.) The time taken to reset
is dependent on the memory fitted (i.e. longer for the 32 Mbyte version.)
11
Summary of Contents for 6110
