background image

BM-A1-64DANTE  User Manual v1.1

2

Bel Digital Audio Ltd

This document confirms that products bearing the CE 

label meet all the requirements in the EMC directive 

2004/108/EC and LV directive 2006/95/EC laid 

down by the Member States Council for adjustment 

of legal requirements. Furthermore the products 

comply with the rules and regulations from 30 

August 1995 referring to the electromagnetic 

compatibility of devices. Bel Digital Audio Limited 

BM-A1-64DANTE units bearing the CE label comply 

with the following harmonised or national standards: 
EMC: 
BS EN 55103-1 :2009 
BS EN 55103-2 :2009 
Safety: 
BS EN 60950-1: 2006 (ed. 2) + A1:2010
Insulation: 
Class1 

 Instructions for Disposal of WEEE by Users 

in the European Union
The symbol shown here is on the product 

or on its packaging, which indicates that 

this product must not be disposed of with 

other waste. Instead, it is the user’s responsibility to 

dispose of their waste equipment by handing it over 

to a designated collection point for recycling of waste 

electrical and electronic equipment. 
The separate collection and recycling of your 

waste equipment at the time of disposal will help 

to conserve natural resources and ensure that it is 

recycled in a manner that protects human health and 

the environment. For more information about where 

you can drop off your waste equipment for recycling, 

please contact your local city office, your household 

waste disposal service or where you purchased the 

product.

User’s Notice and disclaimer:

No part of this manual may be reproduced, 

transmitted, transcribed, stored in a database 

system or translated without the express written 

permission of Bel Digital Audio Ltd. Documentation 

kept by the end user for back-up purposes is excluded 

from the above. 
All products and corporate names mentioned in this 

manual may be registered trademarks or copyrights 

of their respective companies. They are used here 

for indicative purposes only.
The information contained in this manual has been 

carefully checked for accuracy; however no guarantee 

is given with respect to its correctness. Bel Digital 

Audio Ltd. accepts no responsibility or liability for 

any errors or inaccuracies that may appear in this 

manual or the products and software described in 

it. Specifications and information contained in this 

manual are subject to change at any time without 

notice.
© 2015 Bel Digital Audio Ltd. All rights reserved.

This appliance has a serial number located on the 

rear panel. Please record the serial number here for 

your records.
Model Number…………BM-A1-64DANTE
Serial Number………………………………………...

Reference To Statement Of Conformity

Summary of Contents for BM-A1-64DANTE
















Reviews: