BM-A2-64MADI User Manual v1.1
5
Bel Digital Audio Limited
Installation
30. When installing this apparatus, either fix it into
a standard 19” rack or place the apparatus on
a secure level surface. When this apparatus is
rack mounted, fit all rack screws.
31. Ensure that no strain is placed on the cables
connecting to this apparatus. Ensure also that
such cables are not placed where they can be
stepped on, pulled or tripped over.
32. Do not operate this apparatus whilst it is covered
or boxed in any way.
Important Safety Precautions
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
CAUTION:
RISK OF ELECTRIC SHOCK. THIS
EQUIPMENT HAS MORE THAN ONE POWER CORD.
TO REDUCE THE RISKS OF ELECTRIC SHOCK
DISCONNECT BOTH POWER SUPPLY CORDS
BEFORE SERVICING
The lightning flash with arrowhead symbol, within
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating instructions and maintenance
(servicing) instructions in the literature accompanying
the appliance.
Important Safety Information
This apparatus has no mains switch or other user-
operated control for disconnecting the AC mains
power. The mains plugs or the appliance couplers
(IEC sockets) are used as the disconnect devices.
Either device must remain readily operable and
accessible when the apparatus is installed for use.
This unit includes thermally resettable fuses that are
integral to the power supply circuitry, but the unit
must always be powered from a supply fitted with an
HRC type (High In-Rush Current) fuse with a rating
of 1 A.
Warning:
Excessive sound pressure levels from
headphones can cause hearing loss.
