BelAir20E User Guide
IP Settings
April 2, 2012
Confidential
Document Number BDTM02201-A01 Standard
The
ip route del
command deletes a static route.
Use the
gateway
parameter to specify the IP address of the network gateway.
Configuring the
Domain Name
System Lookup
Service
/protocol/ip/set dns server {primary | secondary} <ip_address>
/protocol/ip/del dns server {primary | secondary}
/protocol/ip/set dns domain name <customer.com>
/protocol/ip/del dns domain name
The BelAir20E provides a Domain Name System (DNS) lookup service by
providing a DNS client that resolves computer names to IP addresses. If the
local DNS server fails, a query to the public network is made.
The
set dns server
command specifies the IP address of a primary and
secondary DNS server. The
del dns server
command erases the current IP
address.
The
set dns domain name
command specifies the default domain name required
to perform Fully Qualified Domain Name requests. The
del dns domain name
command erases the current domain name.
The IP addresses of the DNS servers and the default domain name can also be
specified automatically through DHCP. See
.
Configuring IP
Address
Notification
/protocol/ip/set ip-addr-notification {enabled | disabled}
When this setting is
enabled
, the node sends out its IP addresses as traps to the
configured trap destinations every 60 minutes. The notification interval is not
currently configurable. By default, this setting is
disabled
.
