BelAir20E User Guide
System Settings
April 2, 2012
Confidential
Document Number BDTM02201-A01 Standard
The
show country
command displays the current country of operation.
Specifying the
detail
parameter also displays both the name and the ISO 3066
identity code for all supported countries.
The
set country
sets the country of operation for your unit. The
<country_code> parameter is the ISO 3066 identifier for the country as listed
by the
show country detail
. The default value is
US
.
CAUTION!
Improper setting of a unit’s country setting may exceed regulatory
requirements and void the operator’s right to operate the radio equipment.
Contact BelAir Networks for details regarding country specific approvals.
Additional country settings are also available by contacting BelAir Networks.
System
Identification
Parameters
/system/set system-id ([switch <name>] [contact <firm>]
[location <place>])
/system/show system-id
These commands let you manage system identification parameters such as
switch name, switch contact information and physical switch location. The
<name> parameter is limited to 32 characters.
Example
The following example sets the switch name to
BA20E-A
, the contact
information to
BelAirNetworks
and its location to
PoleNumber1
.
/system# system-id switch BA20E-A contact BelAirNetworks
location PoleNumber1
Custom Fields
/system/set custom ([field1 <random_str>][field2 <random_str>]
[field3 <random_str>][field4 <random_str>]
[field5 <random_str>])
/system/show custom fields
These commands let you manage the contents of up to five data fields that you
can use to store any information of your choosing. Each field can store up to
50 characters except for custom field 1 which is limited to 32 characters.
Custom field data is saved with the node’s configuration data.
Example
/system# show custom fields
Custom Field 1: Mesh main node
Custom Field 2: Used for experiments
Custom Field 3: Zone 3 master
Custom Field 4: Services customer xyz
Custom Field 5: First in service
