2
hob can be flush mounted provided the adjacent surface is stainless steel or some other suitable heat
proof material. See Figure (1)
Ensure that the induction hob is well ventilated and the air inlet and outlet is not blocked.
Good
ventilation is vital for a long service life of the induction cooker
. As shown in Fig 2 Ensure the
induction hob is in good working order.
Note: The safety distance between the hotplate and any cupboard above the hotplate should be at least
760mm.
Apply suitable sealant to secure the hob to the worktop and to prevent ingress of water.
Caution
The induction hotplate must be installed by a qualified electrician.
Do not install the cooktop yourself.
The induction hob should not be mounted to cooling equipment, dishwashers and rotary dryers or any
other electrical appliance
The induction hob must be well ventilated to ensure efficient cooling prolonging its
’ life and
ensuring reliability.
Adjacent walls, the worktop and any surfaces above the hob must be made of heat resistant materials.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
PowerConnection
The socket shall be connected according to the relevant national standard or connected to a single-pole
cut-out. The method of connection is shown in Figure (3):
