DURABLASTER
®
WHEEL CLEANER
1MANUL054
Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
27
Maintenance
Disassembly Procedure
To disassemble a DuraBlaster® perform the following:
1. Remove the (4) black knobs, the nut on the flow control and the green back cover. See the
image below. Set all removed items aside until reassembly. The airline (Rotating
DuraBlaster® ONLY) can remain connected at this time.
2. Disconnect the hose from the Feed Manifold. Remove the (4) sets of fasteners that secure
the feed manifold. Set these items aside for use later, during steps 8 and 9 and/or
reassembly. See the images below.
STEPS 3 TO 9 ARE FOR THE ROTATING
DURABLASTER® ONLY
.
Black Knob (4)
Green Cover
Fasteners That
Secure the Feed
Manifold (4) Sets
Parts Secured by
the Removed
Fasteners.
Feed Manifold
Fasteners That
Secure the Feed
Manifold (4) Sets
Parts Secured by
the Removed
Fasteners.
Feed Manifold
Rotating DuraBlaster®
Fixed DuraBlaster®
Hose
Hose Removed