BELARUS-1221.2/1221V.2/1221.3 Scheduled maintenance
256
Operation 19. Lubricate the clutch
release yoke bearing
•
Remove the plug (1) from the left side of
the clutch housing.
•
Using a gun, make 4 to 6 injections of
Litol-24 grease through the lubricator
screwed into the housing of the release
yoke to lubricate the release bearing.
Note:
Do not inject excessive amounts of
grease, as excessive grease will
accumulate inside the clutch housing
and can get to the dry friction surfaces.
Operation 20. Turbocharger
Check tightening of fasteners of the
turbocharger (1), exhaust manifolds (3)
and exhaust pipe bracket (2). As
necessary, tighten the fasteners to a torque
of 35 to 40 N•m.
Operation 21. Front wheel toe-in
The front wheel toe-in must be within 0 to 8
mm. If necessary, perform adjustment
operations in accordance with the
recommendations in the section
“Adjustments”.
Summary of Contents for 1221.2
Page 1: ...BELARUS 1221 2 1221В 2 1221 3 1221 0000010РЭ OPERATORS MANUAL 2009 ...
Page 290: ...BELARUS 1221 2 1221В 2 1221 3 Supplement 293 Electrical scheme of tractor connections ...
Page 291: ...BELARUS 1221 2 1221В 2 1221 3 Supplement 294 Variants of tractor connections ...
Page 293: ...BELARUS 1221 2 1221В 2 1221 3 Supplement 290 826 3805010 instrument board scheme ...
