3522.5-0000010 OM
247
Table 5.2 – Basic parameters
и
coupling dimensions of FLL
Standard size (configuration)
of the device
“LL-2”
Design features
Device consisting of three drawbars (upper
one and two lower ones), articulated by the
front ends with the tractor, and by rear ends
with coupling elements of the implement dur-
ing operation
2 Purpose
To connect (mount) or coupling of mounted,
and semimounted implements
3 Length of lower drawbars, mm
775
4 Unblocked Hinged joint width of the upper (lower)
drawbar, mm
51 (45)
5 Diameter of a pin of hinged joint of upper drawbar,
mm
25
6 Diameter of pin bore of a hinged joint of the lower
drawbar, mm
28,7
7 Distance between PTO shaft end extension face
and suspension axis, mm
555
8 Column height
1)
, mm
610
9 Length of the suspension axis along the collar
1)
,
mm
825
10 Lifting power of the device,
кН
5)
:
а
) on the suspension axis;
b) at overhang of 610 mm from the suspension axis
50
30
_______________________________________________________________________________
1)
Dimension refers to the implement coupling.
2)
It is not allowed to give FLL load exceeding loading of tires specified by loading instruc-
tions set forth in Table 4.3.
Table 5.2
а
– Information about installation of linkage-mounted ballast weights to FLL
1 Equipment title
Linkage-mounted ballast
weights kit assembled
with a bracket
2 Primary purpose
Additional loading of
front driving axis, facilitat-
ing the tractor weight dis-
tribution by coupling to a
tractor lift linkage
3 Design features
It consists of Linkage-
mounted ballast weights
kit assembled with a
mounted bracket
4 Type LL (accord. to GOST 10677)
1)
“LL-2”
5 Category (accord. to GOST 730-1)
1)
Category 2
6 Maximum weight of bracket with ballast weights, kg
1320
7 Minimum weight of bracket with ballast weights, kg
250
8 Weight of bracket without ballast weights, kg
160
________________________________________________________________________________________________________
1)
Refers to the coupling dimensions of mounted bracket.
https://tractormanualz.com/
Summary of Contents for 3522.5
