Section E. Unitizing Belarus-510/512 — Operating manual
46
Rear hitch linkage
The three-point rear hitch linkage of cat-
egory 2 ensures attaching mounted and
semi-mounted agricultural machines and
implements to the tractor with the follow-
ing connecting pieces:
• length of suspension axis L (distance
between the joints A and C) is 870 mm;
• height of machine post is 510 mm; 610
mm
• diameters of fingers for connection to
the lower rod joints (1) is 28.7 mm;
• diameter of finger for connection to the
upper rod (2) is 25 mm.
ATTENTION!
Before connecting ma-
chines, carefully read this section.
The lower rods consist of two parts:
• the front part or the rod itself;
• the back end with a ball joint. Rated
length of lower rods is 885 mm.
To increase the suspension length, set
the rod ends with the bent front joints
(F70-4605050-01/055-01).
To increase the carrying capacity of the
suspension, replace the rod back ends
(400 mm length) with rod ends with a dis-
tance between the joint axle and the front
hole of 320 mm (N50-4605040
А
2/045
А
2).
The total length of the lower rod becomes
805 mm.
ATTENTION!
With the rod length of 805
mm the carrying capacity of the suspen-
sion increases by 10% with a simultane-
ous decrease of the lift height by 10%.
The same increase in the carrying capaci-
ty can be achieved by installing the brace
(1) to additional points (the lift height also
decreases by 10%).
В
885 or 805
mm
L = 870 mm
