Section E. Unitizing Belarus-510/512 — Operating manual
64
Installing twin rear wheels
To improve the passing ability, the trac-
tors can be equipped with twin rear tyres
of 15.5R38 size with use of additional
spacers. To install an additional wheel,
unmount the main wheel, press off the
short bolts from the hub (1) and press in
the long bolts (2) supplied with the spac-
ers. To the bolts (2), install the main wheel
and fasten it with the nuts (3). Then install
the spacer (4) on the same bolts and fas-
ten with the nuts (5). After that, install the
additional wheel on the bolts (6) of the
spacer and fasten it with the nuts (7). The
tightening torque of the nuts fastening the
rear wheels is 300 to 350 N•m (30 to 35
kgf•m).
ATTENTION! Installing twin wheels
to increase the hauling capacity is
forbidden.
Main Wheel
Additional Wheel
tyres of 15.5R38
size
430 mm
2700-2900 mm
Half-shaft
