12
13
STEP 5:
Release
lever on the Umbrella Frame (A) by lifting it up to unlock it, see
Fig. 8. Lift the
lever sleeve up until you reach the stopper that prevents
it from going further up the pole, do this without extending the canopy
arm outward. Push down on the lever to lock it place.
UNLOCK
Fig. 8
Stopper
Lever Sleeve
Lever
Assembly Instructions
UP
Fig. 9
Bracer
Extension
Arm
Stopper
STEP 6:
With the lever sleeve locked in place, extend the canopy arm out enough
to begin opening the umbrella canopy. Do this without extending the
canopy arm to its
stopper
and without securing the
extension arm
in
place using the
bracer
.
Before turning the crank clockwise to open the umbrella canopy for the
first time, please be sure to have a counterweight (not included) in place
to prevent the umbrella from tipping over. Turn the crank clockwise to
open the umbrella canopy completely. Having the crank and its base
up to your chest is normally what is needed to give the umbrella canopy
adequate space to open.
*Please note that the umbrella canopy is not intended to be stiff
when fully opened as is meant to have some room to sway. This is
needed so that the umbrella canopy can fold nicely against other
components of the Umbrella Frame (A) when not in use.
Assembly Instructions
For
Reference
Only
