55
IQH3B/IQH3BQ
User Manual
IP Share Port
•
Full Network:
The Gateway will accept IP Share connections on this IP port number. The
default is 2050. To enter/modify the full network port number, enter the new number in
the editable field and click the Save (S) button. To restore the default value, click the Preset
(P) button.
•
Local Chassis:
This port offers a restricted MAP service, only showing itself. It is used
primarily in complex RollProxy configurations. To enter/modify the local chassis port
number, enter the new number in the editable field and click the Save (
S
) button. To
restore the default value, click the Preset (
P
) button.
Pass WAN Packets
•
SP_IAM:
If this check box is checked then the Gateway will pass wide area I AM messages
received on IP share links to the RollNet network, and over the IP bridge (if connected).
•
SP_TIME:
If this is checked, the Gateway will pass wide area TIME messages received on IP
share links to the RollNet network, and over the IP Bridge (if connected).
RollCall IP Connections
This shows information about IP connections to the Gateway from IP Share or IP Proxy. The
information displayed refers to a single connection. Which connection is displayed is
controlled by the
Show Connection
control.
•
IP Address:
This shows the IP address of the remote unit on this IP connection.
•
TCP Port:
This shows the incoming TCP port number of the RollCall IP share connection.
•
Port Name:
This shows the name under which this IP connection appears.
•
Port Number:
This shows which RollCall port on the Gateway this IP connection
corresponds to.
•
Start Time:
This shows the time at which this IP connection was started.
•
Sent Time?:
This shows if the remote unit on this IP connection has ever sent us a TIME
packet.
•
Packets Receive:
This shows how many packets have been received on this IP connection.
•
Packets Sent:
This shows how many packets have been transmitted on this IP connection.
•
Full Network:
This shows which IP port a connection has come in from. Yes indicates that
the connection is on the Full Network port, no indicates that the connection is on the Local
chassis port.
•
Show Connection:
This controls which IP connection the Gateway shows statistics for.
RollCall IP History
The Gateway may reject IP connections if they do not match the client address set or if the limit
on IP connections has been reached.
•
Last Rejected Client:
This shows the IP address of the last client that the Gateway
rejected.
•
Reject Count:
This shows the number of attempted IP connections that this Gateway has
rejected.
Note:
Pass I_AM (Bridge) overrides both Pass I_AM (Serial) and Pass I_AM
(IP). So if Pass I_AM (Bridge) is set I AM messages will be passed over the
bridge, irrespective of how the other controls are set.
Note:
The Gateway will always use the received time stamp, whether or
not it passes it on. Also (but see also Time from Logger).
Summary of Contents for grass valley IQH3B Series
