KAYENNE K-FRAME — Installation & Service Manual
109
Section
5
Basic Configuration
Introduction
This section provides basic system configuration information for the
Kayenne K-Frame Video Production Center. Refer to the
Kayenne/Karrera
K-Frame Release Notes
for information specific to your current software ver-
sion.
Configuration Steps
Kayenne K-Frame basic system configuration includes the following steps:
1.
Power up the system.
2.
Set IP addresses for your facility (if not using defaults). Node Settings
will also need to be configured for proper system communications (see
).
3.
If necessary, adjust Control Panel button and display illumination
(
).
4.
If necessary, calibrate Control Panel lever arms and joystick (see
Maintenance
section).
5.
Define your basic Engineering Setups. Essential settings include:
•
Source Definition (see
•
Outputs (see
)
•
)
6.
Define a baseline User Setups (Panel Prefs and Suite Prefs). Important
settings include:
•
)
•
Source Patching (see
•
Default Keyframe (see
Summary of Contents for Grass Valley Kayenne K-Frame
