210
KAYENNE K-FRAME — Installation & Service Manual
Section 6 — External Interfaces
General External Device Interfacing
In general, interfacing an external device to the Kayenne K-Frame system
involves the following elements:
•
Control cabling and configuration (Ethernet, serial ports, GPIs).
•
Video cabling (K-Frame input connectors).
•
Creating an External Device Definition (for DDR, VTR, etc.) and
assigning it to a source definition.
•
Mapping that source to a Control Panel button.
Once configured, that external device can be selected as a source on the
Control Panel. If a DDR or VTR it can be directly controlled from the
System Bar, Device Control Module, Multi-Function Module, or from the
Kayenne K-Frame Menu Panel, as well as via EMEM.
PBus and GPI control of external devices is generally accomplished by the
operator using EMEM. PBus and GPI triggers can be manually tested from
the GV Switcher menu application, and Macros can be created to allow trig-
gering using Control Panel buttons.
Routing System configuration with Kayenne K-Frame involves estab-
lishing communications between the Kayenne K-Frame and Routing
control systems, assigning Router destinations to sources, and identifying
which Router sources will be accessible to the system.
Ports & Devices
Control ports, GPI outputs, External Device Definitions, Ethernet Tally and
Editor Ports are configured with the Ports & Devices menus, accessed via
Eng Setup
,
Ports & Devices
, and then touching the appropriate tab.
PBus Ports
The PBus Ports menu is used to configure serial ports for PBus control of
external devices. Twenty four PBus devices are supported, which can be
assigned to the same or different serial ports, using PBus addresses (0-23)
when the same port is used for multiple devices.
Summary of Contents for Grass Valley Kayenne K-Frame
