200
KAYENNE K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
To Assign Aux Buses on a Multi-Destination Panel:
1.
Select Eng Setup, Node Settings in the menu.
2.
Highlight a Panel Delegation button at the top of the screen.
3.
Touch one of the Logical Aux Buses buttons on the lower screen. That
Aux Bus will then be selected when that Remote Aux Delegation button
is pressed on that panel.
Remote Aux Button Mapping
The Remote Aux Button Map menu is used to configure sources to the
Remote Aux Panel source select buttons.
To Map Remote Aux Panel Buttons:
1.
Select Eng Setup, Node Settings in the menu.
2.
Highlight a source select button in the central scrolling list.
3.
Touch a source button on the scrolling list on the right. It will be
assigned to that Remote Aux Panel button.
•
The
Source Number
data pad and scroll knob on the upper right can be
used to quickly select a Kayenne K-Frame source by its logical ID
number
•
The
Lock
button at the bottom prevents the source list from scrolling
when choosing different Remote Aux buttons.
Summary of Contents for Grass Valley Kayenne K-Frame
