30
Specifications
Masterpiece 12G-SDI and IP Mainframes
IP Mainframe Connections
IP Mainframe Inputs/Outputs
QSFP Inputs/
Outputs
2x50GbE
A1/B1
is the Primary QSFP connection of the Upper 'A' and Lower ‘B’
card.
A1 Inputs
- 18 x SMPTE 2022-6 or VSF TR-03 (SMPTE 2110) SD/HD/1080p inputs
across two 50GbE links. Each 50GbE link transports 9 x SMPTE 2022-6 or VSF TR-
03 (SMPTE 2110) SD/HD/1080p inputs.
B1 Inputs
- 18 x SMPTE 2022-6 or VSF TR-03 (SMPTE 2110) SD/HD/1080p inputs
across two 50GbE links. Each 50GbE link transports 9 x SMPTE 2022-6 or VSF TR-
03 (SMPTE 2110) SD/HD/1080p inputs.
A1 Outputs
- 6 x SMPTE 2022-6 or VSF TR-03 (SMPTE 2110) SD/HD/1080p
outputs across two 50GbE links. Each 50GbE link transports 3 x SMPTE 2022-6 or
VSF TR-03 (SMPTE 2110) SD/HD/1080p outputs.
B1 Outputs
- 6 x SMPTE 2022-6 or VSF TR-03 (SMPTE 2110) SD/HD/1080p
outputs across two 50GbE links. Each 50GbE link transports 3 x SMPTE 2022-6 or
VSF TR-03 (SMPTE 2110) SD/HD/1080p outputs.
2x50GbE
A2/B2
is the Secondary QSFP connection of the Upper 'A' and Lower ‘B’
card giving redundancy.
IP Mainframe Input BNCs
Input BNCs
Input BNCs 4 x HD/SD/1080p (270Mbps / 1.485Gbps / 2.97Gbps). Serial digital
interface as REC601/ SMPTE/292M / SMPTE424M via BNC connectors.
Including 1 x 12G-SDI ( SMPTE 2082) single link BNC connector (silver BNC).
IP Mainframe QSFP Inputs/Outputs Formats & Levels
IP Input and
Output
Signals supported over RTP stream per rear module with 2 x 50GbE QSFP Cages.
QSFP+ Optical 2 x 50G Ethernet
Conforms to IEEE 802.3ba - 100GBASE-SR4 100Gigabit over fiber.
QSFP+ direct attached copper (DAC) cable 100GBASE-CR4 100Gigabit Ethernet
over twin axial cables
Analogue HD
Reference
±300mV tri-level sync
6dB
Analogue SD
Reference
300mV sync with optional 300mV pk-pk burst
6dB
Impedance
75 ohms (except reference input).
IP Mainframe Bi-Directional Inputs/Outputs
Bi-directional
Inputs and
Outputs
2x Tri standard, SD-SDI/HD-SDI/3Gbps-SDI BNC Inputs
or
2x 1080p SDI/HD-SDI/SD-SDI (270Mbps / 1.485Gbps / 2.97Gbps) BNC Outputs
IP Mainframe Network/Serial/USB
Network
3x Ports -
NET X1 to NET X3
10/100/1000 base T, Auto – MDX/MDXI on RJ45 connector.
2x Ports -
NET X4 and NET X5
These are Network 10/100/1000 base T for each IP rear card control (RollCall).
‘A' card is NET X4
'B' card is NET X5
Serial Control
2 x RS-422 on RJ45.
USB
2x USB 3.0 - for external memory device or hard drive
USB outputs are 5 V DC, 0.9 A each
Summary of Contents for grass valley MASTERPIECE 12G-SDI
