34
Installation BAT-F
Release 09 08/2015
Note:
With the point-to-point WLAN line, the following pins are short-circuited
at both ends:
2 (DTR) + 6 (DSR)
7 (RTS) + 8 (DSR)
1.8.2
ACA21-M12 interface
This interface offers you the ability to connect the storage medium
AutoConfiguration AdapterACA21-M12. This storage medium is used for
saving/loading the configuration and diagnostic functions, and for loading the
software.
This interface is a 5-pin, A-coded M12 socket with shielding.
Note:
The AutoConfiguration adapter
ACA11
-M12 available for certain
Hirschmann devices is incompatible with BAT-F devices.
1.9
Signal contact
Device variants featuring supply voltage with the characteristic value C, K
or W have a signal contact exclusively.
You have the option of setting the signal contact manually using the device
management.
For further information see
.
Pin
Function
1
U
in
5 V
2
N.C. Not
used
3
D-
Data -
4
GND Ground (0 V)
5
D+
Data +
Table 5:
Pin assignment of the USB interface, 5-pin, A-coded M12 socket
Summary of Contents for Hirschmann BAT-F Series
Page 71: ...Installation BAT F Release 09 08 2015 71 ...
Page 72: ......