32
Installation BAT867-F
Release 01 12/2019
5
Obtain compliance for operation in the
European Union
For operation in the European Union, the device must comply with the Radio
Equipment Directive (RED) 2014/53/EU. The RED compliance requires
compliant operation of the device in the 5 GHz band channels. Compliant
operation of the device is achieved by an unchangeable determination of the
country setting.
Make the country setting unchangeable using the Command Line Interface
(CLI), the graphical user interface or the LANconfig software. You can
download the LANconfig software as an ISO image from the Hirschmann
product pages (
www.hirschmann.com)
.
Perform the following work steps:
Command Line Interface (CLI)
To access the possible country settings, execute the following
command:
set Setup/WLAN/Country ?
Note:
The country setting “Europe” is valid for all European countries.
Specific country settings such as “France” or “Germany” include
additional country specific channels in comparison to the “Europe”
country setting.
The device ignores specific country settings and uses the country
setting “Europe” until the RED compliance has been obtained.
Select the desired country setting with the following command:
set Setup/WLAN/Country [Country]
Example:
set Setup/WLAN/Country France
Execute the following command:
> REDcompliance
Summary of Contents for Hirschmann BAT867-F
Page 53: ...Installation BAT867 F Release 01 12 2019 53...
Page 54: ......
