40
Installation BAT867-F
Release 01 12/2019
10 Technical data
10.1
General technical data
Dimensions
W × H × D
BAT867-F
See “Dimension drawings” on page 41.
Weight
approximately 31.75 oz (900 g)
Supply voltage
Rated voltage
24 V DC
Voltage range incl. maximum
tolerances
18 V DC ... 32 V DC
Connection type
8-pin, “X”-coded M12 socket for PoE port or
a 5-pin, “A”-coded M12 plug
Tightening
torque of the
locking screw
5.3 lb-in (0.6 Nm)
Power loss buffer
10 ms at 19.2 V DC
Overload current protection on
the device
Non-replaceable fuse
Back-up fuse
Nominal rating: 3.5 A
Characteristic:
slow blow
Peak inrush current (slow
voltage increase)
<3.5 A
Current integral I²t
0.373 A
2
s
Climatic
conditions during
operation
Minimum clearance around the
device
Top and bottom sides of device: 2 in (5 cm)
Left and right device side: 0.79 in (2 cm)
Ambient air temperature
a
a. Temperature of the ambient air at a distance of 2 in (5 cm) from the device
Devices with operating temperature
characteristic value L (standard):
+14 °F ... +140 °F (
−
10 °C ... +60 °C)
Devices with operating temperature
characteristic value E and T (extended):
-40 °F ... +158 °F (-40 °C ... +70 °C)
Maximum inner temperature of
device (guideline)
194 °F (90 °C)
Humidity
10 % ... 95 % (non-condensing)
Air pressure
min. 700 hPa (+9842 ft; +3000 m)
max. 1060 hPa (-1312 ft; -400 m)
Climatic
conditions during
storage
Ambient air temperature
a
-40 °F ... +158 °F (-40 °C ... +70 °C)
Humidity
10 % ... 95 % (non-condensing)
Air pressure
min. 700 hPa (+9842 ft; +3000 m)
max. 1060 hPa (-1312 ft; -400 m)
Pollution degree
2
Protection classes Degree of protection
IP65/67
b
b. To preserve the suitability of your device for IP65/67, proceed as follows: Remove all
provided transport protection caps and transport protection screws. Seal unused sockets
and plugs with your desired type of protection screws which you can order separately.
Summary of Contents for Hirschmann BAT867-F
Page 53: ...Installation BAT867 F Release 01 12 2019 53...
Page 54: ......
