24
Central Switching Module PTN-CSM310-A/PTN-CSM540-A
Release 03 05/2020
both CSMs must be in synchronization. It means that one CSM must be in the Active state,
and the other one in the Standby state.
How to perform such an upgrade procedure has been described in Ref. [2Mgt] in Table 2.
NOTE:
‘In Service Revert’ (Redundant CSMs only) is
a procedure is for falling back to a
previous firmware version and is similar to ‘In Service Upgrade’, see also Ref. [2Mgt]
in Table 2.
2.5
Add a New Node to a Live Network
See Ref.[1] in Table 2.
3.
MODULE SPECIFICATIONS
3.1
General Specifications
For general specifications like temperature, humidity, EMI ... see Ref.[4] in Table 2.
3.2
Other Specificiations
Table 10
Other Specifications
Description
Value
CSM310-A
Weight
1.1 kg / 2.4 lb
MTBF
71 years at 25°C/77°F
Power Consumption
27W (measured at 25°C/77°F, with data transport)
Module Size
width: 60.6 mm / 2.39 inches
height: 126 mm / 4.96 inches
depth: 195 mm / 7.68 inches
HiProvision Connection
Via a twisted pair RJ45 connector for 10/100 Mbps BASE-T Ethernet interface
CSM540-A
Weight
1.53 kg / 3.36 lb
MTBF
54.3 years at 25°C/77°F
Power Consumption
50W (measured at 25°C/77°F, without data transport)
Module Size
width: 372.5 mm / 14.66 inches
height: 43 mm / 1.69 inches
depth: 202 mm / 7.95 inches
HiProvision Connection
Via a twisted pair RJ45 connector for 10/100 Mbps BASE-T Ethernet interface
3.3
Ordering Information
PTN-CSM310-A: 942 230-001
PTN-CSM540-A: 942 230-002
4.
ABBREVIATIONS
ASIC
Application-Specific Integrated Circuit
BFD
Bidirectional Forwarding Detection
CE
Conformité Européenne
