36
Installation GRS1020/1120/1030/1130
Release 04 01/2020
100 Mbit/s F/O port (optional)
This port is an SFP slot.
The 100 Mbit/s F/O port allows you to connect network components
according to the IEEE 802.3 100BASE-FX standard.
This port supports:
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
Default setting: Full duplex
1.6.2
Media modules
You have the option to connect terminal devices or other segments to the
ports of the media modules via twisted-pair cables or F/O cables.
100 Mbit/s F/O port
This port is an SFP slot or an ST or DSC socket.
See “Port assignment of the media module variants” on page 32.
The 100 Mbit/s F/O port allows you to connect network components
according to the IEEE 802.3 100BASE-FX standard.
This port supports:
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
Default setting: Full duplex
Applies to device variants with DSC ports or ST ports:
When connecting the data cables, note the sending and receiving
directions.
10/100 Mbit/s twisted pair port
This port is an RJ45 socket.
The 10/100 Mbit/s twisted pair port allows you to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX
standard.
This port supports:
Autonegotiation
Autopolarity
Autocrossing (if autonegotiation is activated)
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
Delivery state: Autonegotiation activated
The port casing is electrically connected to the front panel.
Sending direction
Receiving direction
Summary of Contents for HIRSCHMANN GREYHOUND GRM Series
Page 80: ......