Installation GRS1020/1120/1030/1130
Release 04 01/2020
39
By default, the port status is displayed on the service panel. You have the
option of changing between the LED displays using the command line
interface (CLI). You require administrator rights for this.
To change to the LED display on the port panel, execute the following
commands in the CLI:
To change to the LED display on the service panel, execute the following
commands in the CLI:
1.7.3
Media module status
1 LED is located on the media module at the bottom left.
This LED provides information on the supply voltage status of the media
module.
enable
Change to the privileged EXEC mode.
configure
Change to the configuration mode.
system port-led-mode
portpanel
Change LED display from service panel to port
panel.
enable
Change to the privileged EXEC mode.
configure
Change to the configuration mode.
system port-led-mode
servicepanel
Change LED display from port panel to service
panel.
LED
Display
Color
Activity
Meaning
Power Supply voltage
–
none
Media module is inoperative
green
lights up Supply voltage is on
Summary of Contents for HIRSCHMANN GREYHOUND GRM Series
Page 80: ......