Belden HIRSCHMANN HiOS-2A User Manual Download

Page: 4 / 66

Contents

UM Security BRS-2A

Release

8.7

05/2022

Security configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2.6.1

Assign a static IP address for the device management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

2.6.2

Disable HiDiscovery access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

2.6.3

Configure a VLAN dedicated to management access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

2.6.4

Disable logical access to the Signal Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

2.6.5

Disable logical access to the Digital Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

2.6.6

Disable logical access to unused ports and SFP slots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

2.6.7

Configure Power over Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

2.6.8

Disable booting from an external memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

2.6.9

Disable automatic device software update from an external memory . . . . . . . . . . . . . . . . . . . . . 31

2.6.10

Disable writing a configuration profile to an external memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

2.6.11

Disable loading a configuration profile from an external memory . . . . . . . . . . . . . . . . . . . . . . . . 31

2.6.12

Disable loading a configuration profile that lacks a valid fingerprint. . . . . . . . . . . . . . . . . . . . . . . 32

2.6.13

Disable insecure management protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

2.6.14

Configure management IP access restrictions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

2.6.15

Configure a dedicated HTTPS certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

2.6.16

Configure a dedicated SSH host key pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

2.6.17

Configure a dedicated user account login policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

2.6.18

Configure a dedicated user account password policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

2.6.19

Configure dedicated user account names and access roles for device management. . . . . . . . . 34

2.6.20

Adapt session timeouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

2.6.21

Configure time synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

2.6.22

Configure logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2.6.23

Configure dedicated login banners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2.6.24

Configure advanced device security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2.6.25

Configure advanced user authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2.6.26

Create a backup of device-specific data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

2.7

Possible hardware modifications for security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

2.7.1

Restrict physical access to the USB port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

2.7.2

Restrict physical access to network ports or SFP slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

2.7.3

Restrict physical (visual) access to the device and port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . 38

2.7.4

Restrict physical access to the Signal Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

2.7.5

Restrict physical access to the Digital Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

2.8

Device installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

2.8.1

Data connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

2.8.2

Signal Contact considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

2.8.3

Digital Input considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

2.9

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

2.9.1

Environmental conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

2.9.2

Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

2.10

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

2.10.1

Software update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

2.10.2

Hardware enhancement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

2.10.3

Hardware replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

2.10.4

Hardware repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

2.11

Decommissioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

2.11.1

Destruction of confidential data and secrets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

2.11.2

Secure physical destruction of device and components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Network security support

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.2

Prerequisites for setting up network security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3.3

Employ defense in depth for your network infrastructure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Summary of Contents for HIRSCHMANN HiOS-2A



































































Search results

Summary of Contents for HIRSCHMANN HiOS-2A

Reviews:

Related manuals for HIRSCHMANN HiOS-2A

Brands by name

Popular brands

Belden HIRSCHMANN HiOS-2A, User Manual

Search results

Summary of Contents for HIRSCHMANN HiOS-2A

Reviews:

Related manuals for HIRSCHMANN HiOS-2A

Brands by name

Popular brands