40
Installation MACH4002
Release 16 03/2021
Select the assembly location according to the safety guidelines
(see on
.
When selecting the assembly location, also make sure the following
requirements are met:
The assembly location can be accessed for maintenance and repair work.
The LED display elements are clearly visible.
Twisted pair cables are at a sufficient distance from potential sources of
electrical interference, such as power supply cables.
The device has a separate power source with a ground connection. The
power supply can be interrupted by means of a separate isolator or power
switch. We recommend using overvoltage protection for all devices.
Note:
The shielding ground of the connectable twisted pair cables is
connected to the front panel as a conductor.
2.2.2
Mounting on a flat surface
Before operating the device on a flat surface, such as a table, stick the
supplied casing feet onto the bottom of the device, with approx. 0.8 in (2 cm)
of space from the corners.
If necessary, remove any dirt from the bottom of the device where you
want to place the stick-on feet.
Remove the protective foil from the adhesive surface of a casing foot and
attach the casing foot on the device.
2.2.3
Mounting in a switch cabinet
The devices are designed to be mounted in a 19" switch cabinet.
By mounting your MACH4002 device in a 19" switch cabinet on sliding/
mounting rails, you provide a more stable position for your device in
environments subject to vibration.
Note:
For more information on sliding/mounting rails and how to install them,
please contact your switch cabinet manufacturer.
If you are operating the device in a 19" switch cabinet, you must install
sliding/mounting rails (not included in the delivery) to hold the weight of the
device.
NOTE
VIBRATIONS
Assemble the device in a 19" switch cabinet on sliding/mounting rails.
Non-adherence to these instructions can lead to material damage.
Summary of Contents for Hirschmann MACH4002 Series
Page 71: ...Installation MACH4002 Release 16 03 2021 71 ...
Page 72: ......
